ISM4 INSTALLATION & PROGRAMMING MANUAL

Delay – with additional Command Structures in the Macro

13.To add a delay after the IR Command in Command Structure 1, after Step 5, press the Delay Button. The ISM4 will respond by entering DELAY Learn Mode and the Program LED will flash once.

14.Press the Next Button once for each second of Delay to be added to the Command Structure. Press the Prev Button once for each second of Delay to be subtracted.

NOTE: The first press of the Next Button will add one second of delay. Each additional press will add one second up to 60 seconds after which the timer will reset to 0 seconds. The first press of the Prev Button will add 60 seconds of delay. Each additional press will subtract one second down to 0 seconds after which the timer will reset to 60 seconds.

No Delay – no additional Command Structures in the Macro

15.If there are no additional Command Structures in the Source 1 ON Macro, press "Next" for 2 seconds (Indicated by the first blink of the Active Source LED). The ISM4 will shift to the Source 1 OFF Macro, Command Structure 1. (Source LED solid green, Program LED solid red.)

NOTE: A 2 second press of the Prev Button (Indicated by the first blink of the Active Source LED) will shift programming to the previous Macro. (i.e. a 2 second press of the Prev Button while in Source 1 ON Edit Mode, will shift Edit Mode to the Source 4 OFF Macro. (Source 4 LED solid green, Program LED orange.)

Test Macro

16.When all Command Structures within a Source ON or OFF Macro have been programmed, tested and saved, the complete Macro can be tested by pressing the Test Button.

NOTE 1: If the IR Commands and Delays within the Command Structures were not properly saved, the Macro cannot be tested and the Program LED will flash red to indicate error.

NOTE 2: To Test a Macro starting from Normal Operation Mode, Press Sequence for 2 seconds (Indicated by the first blink of the Active Source LED) to enter Edit Mode, (Source 1 and Program LED’s green), Navigate to the Macro to be tested (2 second press of Prev or Next) and then press the Test Button.

Program Remaining Macros

17.Navigate to the next Source ON or OFF Macro to be programmed. From the Source 1 ON Macro, press the Next Button for 2 seconds (Indicated by the first blink of the Active Source LED). The ISM4 will shift to the Source 1 OFF Macro; Command Structure 1. (Source LED solid green, Program LED solid orange.) NOTE: A 2 second press of the Prev Button (Indicated by the first blink of the Active Source LED) will shift programming to the previous Macro. (i.e. a 2 second press of the Prev Button while in Source 1 ON Edit Mode, will shift Edit Mode to the Source 4 OFF Macro. (Source 4 LED solid green, Program LED red.)

18.Repeat Steps 2-17above until all Source ON and OFF Macros have been programmed, tested and saved. It is vitally important to program both the Source ON and OFF Macros. The ISM4 will not function properly if both sets of Macros have not been programmed.

Exit Edit Mode

19.To exit Edit Mode, at any time during Edit Mode, press the Prev Button for 10 seconds (Indicated by the third blink of the Active Source LED). The ISM4 will return to Normal Operating Mode.

Test ISM4 (All Macros)

NOTE: All system devices and components must be properly setup and connected to test ISM4 Macro Programming. Be sure all Sensors are connected to the appropriate device and Source Sense Inputs on the ISM4, and be sure all IR Emitters are connected to the appropriate Source “IR Out “on the ISM4 and attached to the correct device over the IR eye for that device.

20.With all Sources OFF, turn the System Reference Device (Source 1) ON. All Sources should turn ON and any additional setup programming (source select, play, etc) should execute as programmed. If any functions were ‘missed’, test the individual ON Macro for that Source. Re-learnIR Commands and adjust delays as necessary until the system powers up correctly.

21.Repeat Step 20 for System OFF. (Turn the System Reference Device, Source 1, OFF).

ISM4 specifications

The Xantech ISM4 is an innovative multi-zone audio distribution system designed to enhance the listening experience across various environments. This advanced model is particularly suitable for residential and commercial applications, where high-quality audio distribution is crucial.

One of the standout features of the ISM4 is its ability to manage up to four separate audio zones. This means users can enjoy different audio sources in different areas simultaneously, catering to diverse preferences and activities. The system supports various audio sources, including streaming services, local media players, and traditional radio, which can all be directed to any zone, providing flexibility and convenience.

The ISM4 utilizes sophisticated digital signal processing (DSP) technology to ensure that audio quality is always at its peak. The DSP allows for customizable audio settings such as equalization, volume adjustment, and audio balance, enabling users to tailor their listening experience to their unique preferences and room characteristics. This level of customization ensures that whether it’s background music in a living room or dynamic sound in a home theater, the audio output is optimized.

Another significant characteristic of the Xantech ISM4 is its user-friendly interface. The system can be controlled via a dedicated app or physical switches, offering versatility in how users interact with their audio setup. The app is compatible with both iOS and Android devices, making it accessible to a wide range of users. Furthermore, the ISM4 can be easily integrated with third-party control systems and home automation solutions, allowing for seamless synchronization with other smart home technology.

Connectivity is another strong point of the ISM4. It supports various input options, including HDMI, optical, and analog connections, allowing users to connect a variety of audio sources without hassle.

Reliability and durability are ensured through robust build quality, making the ISM4 suitable for long-term use in various environments. With its combination of advanced audio distribution capabilities, user-friendly features, and robust connectivity, the Xantech ISM4 stands out as a leading choice for those looking to elevate their audio experience in both home and commercial settings. Users can expect exceptional sound quality, seamless integration, and the flexibility to enjoy audio the way they want.