ISM4 INSTALLATION & PROGRAMMING MANUAL

With the ISM4 powered up and with the IR Emitters attached to the devices to be controlled, program the ISM4 as follows:

NOTE: Unless instructed to press a button for a specific duration a button press should be at most one full second.

IMPORTANT NOTE: If programming the ISM4 so the System Reference Device (Source 1) will be turned ON and OFF with its native remote or other system controller, the programmer must ensure that the Power command (if present) be placed in Command Structure number 1. This applies to both the ON and OFF macros. This requirement is imposed on Source 1 ONLY. Refer to the “Sense In” section for further details.

If there are other ‘setup’ commands to be executed as part of the Source 1 ON Macro, (Input, Surround Mode, Tuner Preset, etc), simply program a delay long enough to allow Source 1 to power up and respond to additional IR commands. (Step 13 below). Recall that the Delay will be executed regardless of whether or not a Power Command is present in Command Structure 1.

If any of Sources 2-4 will have ‘setup’ commands included in their ON Macros, be sure to program a delay in the Source ON Macro, Command Structure 1 that is long enough to allow those Sources to power up and be ready to respond to additional IR commands.

The following sections mention the ISM4’s time dependent push button function blink patterns. For a detailed discussion refer to section “Source 1-4 LED’s”. These blink patterns were added to transfer the time keeping burden away from the programmer and onto the ISM4.

Learn IR

1.Press the Sequence Button for 2 seconds (Indicated by the first blink of the Active Source LED) to enter Edit Mode. The ISM4 will default to the Source 1 ON Macro. (Source 1 and Program LED’s sold green.)

2.Press the Sequence Button to enter IR Learn Mode for Source 1 ON Macro Command Structure 1. The Source 1 LED will flash for about 5 seconds. This is the amount of time allowed to teach an IR Command.

3.Position the IR Remote for the System Reference Device (Source 1) directly in front of the IR Learn Window on the ISM4 (within an inch) and press and hold the ON or Power Button on the remote until the Program LED flashes green three times. If the Program LED flashes red three times, proceed to Step 9.

4.Press the Test Button and confirm the function of the learned command on Source 1.

5.If Source 1 responded properly to the learned command, press Sequence again to save the command. The Program LED will flash once. The ISM4 will automatically return to EDIT Mode upon save. To return to Edit Mode without saving, press the PREV Button. Proceed to Step 11 or 13, as appropriate.

6.If Source 1 did not respond properly to the learned command, press Delete. The ISM4 will automatically go into IR Learn Mode for the current Command Structure. (Source 1 ON Macro; Command Structure 1)

7.Repeat Steps 3-6as necessary until the command is learned, tested, confirmed and saved.

8.To add a Delay to Command Structure 1, proceed to Step 13.

IR Learn Error

9.If the Program LED flashed red three times during IR Learn, that indicates a learn error. Press Delete to remove the bad command from memory.

10.Repeat Steps 2-6as necessary until the command is learned, tested, confirmed and saved.

No Delay – with additional Command Structures in the Macro

11.If there is no delay required for Command Structure 1, and there is at least one more Command Structure in the Macro, press "Next" for one second. The Source 1 LED will flash twice indicating the ISM4 is ready to Learn the IR Command for Command Structure 2. If the ISM4 is pointing to Command Structure 3, the Source 1 Led will blink 3 times. It will blink 4 times if pointing to Command Structure number 4 and 5 times if pointing to Command Structure number 5.

12.Repeat Steps 2-9as necessary until the IR Command for Command Structure 2 is learned, tested, confirmed and saved.

ISM4 specifications

The Xantech ISM4 is an innovative multi-zone audio distribution system designed to enhance the listening experience across various environments. This advanced model is particularly suitable for residential and commercial applications, where high-quality audio distribution is crucial.

One of the standout features of the ISM4 is its ability to manage up to four separate audio zones. This means users can enjoy different audio sources in different areas simultaneously, catering to diverse preferences and activities. The system supports various audio sources, including streaming services, local media players, and traditional radio, which can all be directed to any zone, providing flexibility and convenience.

The ISM4 utilizes sophisticated digital signal processing (DSP) technology to ensure that audio quality is always at its peak. The DSP allows for customizable audio settings such as equalization, volume adjustment, and audio balance, enabling users to tailor their listening experience to their unique preferences and room characteristics. This level of customization ensures that whether it’s background music in a living room or dynamic sound in a home theater, the audio output is optimized.

Another significant characteristic of the Xantech ISM4 is its user-friendly interface. The system can be controlled via a dedicated app or physical switches, offering versatility in how users interact with their audio setup. The app is compatible with both iOS and Android devices, making it accessible to a wide range of users. Furthermore, the ISM4 can be easily integrated with third-party control systems and home automation solutions, allowing for seamless synchronization with other smart home technology.

Connectivity is another strong point of the ISM4. It supports various input options, including HDMI, optical, and analog connections, allowing users to connect a variety of audio sources without hassle.

Reliability and durability are ensured through robust build quality, making the ISM4 suitable for long-term use in various environments. With its combination of advanced audio distribution capabilities, user-friendly features, and robust connectivity, the Xantech ISM4 stands out as a leading choice for those looking to elevate their audio experience in both home and commercial settings. Users can expect exceptional sound quality, seamless integration, and the flexibility to enjoy audio the way they want.