Introduction, ISM4 INSTALLATION & PROGRAMMING MANUAL

ISM4 INSTALLATION & PROGRAMMING MANUAL

INTRODUCTION

Congratulations and thank you for purchasing the Xantech ISM4 Intelligent System Manager. The ISM4 is the answer to the age old problem of simply and inexpensively keeping Home Entertainment System devices in sync.

The ISM4 can sync up to four IR controlled devices when referenced to one of those devices, typically a Video Monitor, Home Theater A/V Receiver or Whole House Audio/Video Entertainment System Controller. All four system devices are referenced to the ISM4 via Xantech Sensing Modules. There are 6 different sensors that can be used to detect voltage, contact closure, video, audio, light or current. When the System Reference Device is turned ON, the ISM4 will detect the change of state for the referenced device (from OFF to ON) and ‘look’ at the state of the other devices. If any or all are OFF, the ISM4 will automatically output IR Commands to turn those devices ON for proper system sync.

The ISM4 Processor constantly scans the Sense Inputs, whether any of the system devices are ON or not. This serves multiple purposes. First, when the System Reference Device is ON, it keeps the other system devices ON. That doesn’t just mean at the initial power up, but for as long as the reference device is ON. Some devices such as DVD players will time out after a certain period of inactivity. If a device were to time out or otherwise turn OFF, (as long as the System Reference Device is ON) when the ISM4 Processor scans the Sense Inputs, if any device is OFF the ISM4 will output the proper IR Command to turn the device ON and restore proper system sync.

The opposite is also true. If the System Reference Device is OFF and the ISM4 detects any of the other three devices are ON, the ISM4 will output the proper IR Command(s) and turn it/them OFF to restore proper system sync.

In addition to issuing power commands to maintain sync, each device can have a macro of up to five IR Commands and Delays associated with the sync mechanism so anytime a device is synced to the system, a default mode for each device (and ultimately the system) can be implemented. This allows the reference device to be set to a specific input at specific volume and audio mode (depending upon device capability). Sources can be set to Play (DVD/CD, Media Servers, etc) or tune to a specific channel (Cable, Satellite, XM, Sirius, AM/FM).

There is no special remote or keypad required to activate the ISM4. It will automatically respond to the status of the System Reference Device to sync the other system devices. However, the ISM4 can be controlled via IR. For IR control, the ISM4 responds to Xantech RC68 Commands. Any programmable controller that can learn RC68 Commands can be used with an ISM4. There is an IR Control Input that can be integrated with most IR repeater systems and an IR Receiver Jack that is compatible with any Xantech IR Receiver with a stereo mini plug. (291 Series or ‘Dash 30’ Type 480-30, 490-30 etc). The IR Inputs will also pass through IR Commands, allowing direct control of the system devices, so typically no additional connecting block or other IR system components are required.

The RS232 Protocol allows for a bi-directional interface between the ISM4 and the RS232 Control Device. Incoming ASCII Text Commands can be associated with IR Commands for Discrete ON/OFF or Toggle Power of the System Reference Device, Query Source Power State and request general System Info. The ISM4 will return an ASCII Text Status Message to the control device for use as system status indication or other logic as implemented per system design.

The ISM4 is a stand-alone programmed device and does not require any programming software for setup. A simple, logical progression of IR Code Learning is used with each step prompted by the Front Panel LED's. Specific LED modes indicate which Source macro is being programmed right down to which step in the macro, and how many seconds are in the delay. All programming can be tested right from the ISM4 while learning for individual code confirmation or when programming is complete for system function confirmation. ISM4 Programming can be cloned from one unit to another via the RS232 Port on the Rear Panel.

Multiple ISM4 Modules can be linked for expansion in systems with more than four devices. All devices will be synced to the System Reference Device on the Primary Module.

Xantech ISM4 – Intelligent System Management made simple.

ISM4 specifications

The Xantech ISM4 is an innovative multi-zone audio distribution system designed to enhance the listening experience across various environments. This advanced model is particularly suitable for residential and commercial applications, where high-quality audio distribution is crucial.

One of the standout features of the ISM4 is its ability to manage up to four separate audio zones. This means users can enjoy different audio sources in different areas simultaneously, catering to diverse preferences and activities. The system supports various audio sources, including streaming services, local media players, and traditional radio, which can all be directed to any zone, providing flexibility and convenience.

The ISM4 utilizes sophisticated digital signal processing (DSP) technology to ensure that audio quality is always at its peak. The DSP allows for customizable audio settings such as equalization, volume adjustment, and audio balance, enabling users to tailor their listening experience to their unique preferences and room characteristics. This level of customization ensures that whether it’s background music in a living room or dynamic sound in a home theater, the audio output is optimized.

Another significant characteristic of the Xantech ISM4 is its user-friendly interface. The system can be controlled via a dedicated app or physical switches, offering versatility in how users interact with their audio setup. The app is compatible with both iOS and Android devices, making it accessible to a wide range of users. Furthermore, the ISM4 can be easily integrated with third-party control systems and home automation solutions, allowing for seamless synchronization with other smart home technology.

Connectivity is another strong point of the ISM4. It supports various input options, including HDMI, optical, and analog connections, allowing users to connect a variety of audio sources without hassle.

Reliability and durability are ensured through robust build quality, making the ISM4 suitable for long-term use in various environments. With its combination of advanced audio distribution capabilities, user-friendly features, and robust connectivity, the Xantech ISM4 stands out as a leading choice for those looking to elevate their audio experience in both home and commercial settings. Users can expect exceptional sound quality, seamless integration, and the flexibility to enjoy audio the way they want.