Xantech ISM4 RS232 COM PORT SETTINGS, ISM4 RS232 COMMAND STRINGS, RS232 Com Port Settings

Page 24
RS232 CONTROL AND PROGRAMMING

ISM4 INSTALLATION & PROGRAMMING MANUAL

24

RS232 CONTROL AND PROGRAMMING

The ISM4 can be controlled via RS232 to allow power management of the devices controlled by the ISM4 from a PC or appropriately capable system controller. It is important to note that the RS232 capability only allows for Discrete ON/OFF, Toggle ON/OFF as well as Status and System Information. The RS232 Discrete ON/OFF and Toggle Commands allow turning the System Reference Device (Source 1) ON/OFF. IT DOES NOT ALLOW RS232 CONTROL OF ANY OTHER SOURCES OR FUNCTIONS.

The Status feature provides queried or automatic feedback of Source ON/OFF Status. Queried feedback will provide ON/OFF Status of Sources 1-4 in the form of ASCII Text Strings when asked by a control device. Automatic Source Power State Notifications are provided as ASCII Text Strings anytime there is a change in Source ON/OFF Status. This feature (Auto) can be turned on or off as appropriate for a given application. By default, this feature is disabled.

ISM4 System Information can also be queried for product information such as Device, Hardware and Firmware Rev, should it be relevant in troubleshooting. Xantech Technical Support personnel may request this information in a problematic application.

To respond to RS232 Commands, the ISM4 must be properly connected via the RS232 jack on the Rear Panel as described in Section: Other Connections/RS232.

RS232 Com Port Settings

Use the following Table to configure the RS232 output of the device controlling the ISM4:

ISM4 RS232 COM PORT SETTINGS

Baud Rate

Parity

Data Bits

9600

None

8

Stop Bits

1

Flow Control

None

RS232 Command Strings

The following Table details the allowable RS232 Command Strings for control of the ISM4. Note only Source 1 can be controlled for ON/OFF. Automatic Source Power State Notification is an optional feature that will automatically output a report any time there is a change of state on any Sense Input. The function can be enabled/disabled using the Command Strings in the following Table. The actual report messages are detailed in the ISM4 Queries Table (Return).

 

ISM4 RS232 COMMAND STRINGS

 

 

 

 

 

 

 

Name

Command

Return

 

Remarks

 

Source 1 Discrete ON

!1PR1+

OK{CR}

 

Turn Source 1 ON

 

 

 

ERROR{CR}

 

Turn Source 1 OFF

Source 1 Discrete OFF

!1PR0+

OK{CR}

 

 

 

ERROR{CR}

 

Toggle Source 1 Power

Source 1 Toggle Power

!1PT+

OK{CR}

 

 

 

ERROR{CR}

 

(If OFF turn ON; If ON

 

 

 

 

turn OFF)

Enable Automatic Source

1ZA1+

OK{CR}

 

Enable Automatic Source

Power State Notification

 

ERROR{CR}

 

Power State Notification

Disable Automatic Source

1ZA0+

OK{CR}

 

Disable Automatic Source

Power State Notification

 

ERROR{CR}

 

Power State Notification

NOTE: Allowable Syntax for the Command Strings includes: (Source 1 Discrete ON used for example) !1PR1+

!01PR1+

!1PR01+

!01PR01+

ISM4 Queries

The ISM4 supports two layers of Source Power Notifications. The first is supported via explicit RS232 Queries (via the Source Power Query described in the Queries Table). The second is launched automatically by the

Image 24
Contents INSTALLATION & PROGRAMMING MANUAL ISM4INTELLIGENT SYSTEM MANAGER TABLE OF CONTENTS ISM4 INSTALLATION & PROGRAMMING MANUALINTRODUCTION ISM4 INSTALLATION & PROGRAMMING MANUALISM4 FEATURE DESCRIPTIONS ISM4 INSTALLATION & PROGRAMMING MANUALISM4 INSTALLATION & PROGRAMMING MANUAL Figure 2 - ISM4 Rear Panel FeaturesISM4 REAR PANEL FEATURES Edit ModeISM4 INSTALLATION & PROGRAMMING MANUAL ISM4 INSTALLATION & PROGRAMMING MANUAL ISM4 BOTTOM PANEL FEATURESISM4 INSTALLATION & PROGRAMMING MANUAL ISM4 INSTALLATION & PROGRAMMING MANUAL ISM4 INSTALLATION & PROGRAMMING MANUAL SYSTEM APPLICATIONS ISM4 INSTALLATION & PROGRAMMING MANUALISM4 INSTALLATION & PROGRAMMING MANUAL MULTI-ZONEA/V SYSTEM FigureINSTALLATION CONNECTIONSISM4 INSTALLATION & PROGRAMMING MANUAL ISM4 INSTALLATION & PROGRAMMING MANUAL ISM4 INSTALLATION & PROGRAMMING MANUAL Source 2 DVD PlayerSource 3 Cable Box Source 4 Video RecorderISM4 INSTALLATION & PROGRAMMING MANUAL OTHER CONNECTIONS RS232Figure 7 ISM4 RS232 Pinout EXPANSIONISM4 INSTALLATION & PROGRAMMING MANUAL PROGRAMMING SOURCESISM4 INSTALLATION & PROGRAMMING MANUAL MACRO PROGRAMMING TABLE ISM4 INSTALLATION & PROGRAMMING MANUALISM4 INSTALLATION & PROGRAMMING MANUAL ISM4 INSTALLATION & PROGRAMMING MANUAL ISM4 INSTALLATION & PROGRAMMING MANUAL ISM4 INSTALLATION & PROGRAMMING MANUAL Test OFFISM4 RS232 COM PORT SETTINGS ISM4 RS232 COMMAND STRINGSISM4 INSTALLATION & PROGRAMMING MANUAL RS232 Com Port SettingsISM4 QUERIES ISM4 INSTALLATION & PROGRAMMING MANUALRS232 Command String/Query Legend ISM4 INSTALLATION & PROGRAMMING MANUAL CLONING THE ISM4OPERATING THE ISM4 ISM4 INSTALLATION & PROGRAMMING MANUALISM4 INSTALLATION & PROGRAMMING MANUAL RS232 Triggered CommandsISM4 INSTALLATION & PROGRAMMING MANUAL APPENDIXISM4 INSTALLATION & PROGRAMMING MANUAL ISM4 INSTALLATION & PROGRAMMING MANUAL ISM4 INSTALLATION & PROGRAMMING MANUAL SPECIFICATIONS ISM4 INSTALLATION & PROGRAMMING MANUALISM4 INSTALLATION & PROGRAMMING MANUAL BLANK PAGEISM4 INSTALLATION & PROGRAMMING MANUAL BLANK PAGEISM4 INSTALLATION & PROGRAMMING MANUAL
Related manuals
Manual 8 pages 11.05 Kb

ISM4 specifications

The Xantech ISM4 is an innovative multi-zone audio distribution system designed to enhance the listening experience across various environments. This advanced model is particularly suitable for residential and commercial applications, where high-quality audio distribution is crucial.

One of the standout features of the ISM4 is its ability to manage up to four separate audio zones. This means users can enjoy different audio sources in different areas simultaneously, catering to diverse preferences and activities. The system supports various audio sources, including streaming services, local media players, and traditional radio, which can all be directed to any zone, providing flexibility and convenience.

The ISM4 utilizes sophisticated digital signal processing (DSP) technology to ensure that audio quality is always at its peak. The DSP allows for customizable audio settings such as equalization, volume adjustment, and audio balance, enabling users to tailor their listening experience to their unique preferences and room characteristics. This level of customization ensures that whether it’s background music in a living room or dynamic sound in a home theater, the audio output is optimized.

Another significant characteristic of the Xantech ISM4 is its user-friendly interface. The system can be controlled via a dedicated app or physical switches, offering versatility in how users interact with their audio setup. The app is compatible with both iOS and Android devices, making it accessible to a wide range of users. Furthermore, the ISM4 can be easily integrated with third-party control systems and home automation solutions, allowing for seamless synchronization with other smart home technology.

Connectivity is another strong point of the ISM4. It supports various input options, including HDMI, optical, and analog connections, allowing users to connect a variety of audio sources without hassle.

Reliability and durability are ensured through robust build quality, making the ISM4 suitable for long-term use in various environments. With its combination of advanced audio distribution capabilities, user-friendly features, and robust connectivity, the Xantech ISM4 stands out as a leading choice for those looking to elevate their audio experience in both home and commercial settings. Users can expect exceptional sound quality, seamless integration, and the flexibility to enjoy audio the way they want.