Installation, Connections | Xantech ISM4 specs

ISM4 INSTALLATION & PROGRAMMING MANUAL

INSTALLATION

The ISM4 should be installed in the same general location as the system A/V components (A/V Receiver, Multi- Zone Controller, DVD, SAT, etc). Xantech SM Series Sensor Cables are approximately 6 feet in length and Xantech IR Emitter wires are approximately 10 feet in length, so plan the ISM4 location relative to the other equipment accordingly. The ISM4 does not generate any critical amount of heat and does not need any special consideration in terms of ventilation but proper precautions should always be taken to assure the free flow of air through and around system components to avoid damage. The ISM4 can be placed on a shelf in an equipment rack or closet or placed directly on top of a system device. It is suggested however, that the ISM4 not be placed directly on top of a device that generates high levels of heat to protect the ISM4 circuitry and longevity.

CONNECTIONS

ISM4 connections are fairly simple. The most important factor is keeping the wiring consistent by source. That means be sure the device connected to the Source 1 “Sense In” is the same device attached to the Source 1 IR Emitter. Labeling the Sensor and Emitter Wires as Source 1, 2, 3, 4 or by specific brand/device (Denon Receiver, Toshiba DVD, etc) will help in avoiding connection errors and assist in troubleshooting, if necessary. There are many possible connection schemes for ISM4 controlled systems. For the purpose of the following discussions, the systems in Figures 4 and 6 will be used. Also note that Xantech manufactures a full line of Sensor Modules including: Audio (SMAUD01), Video (SMVID01), Magnetic/Current (SMMAG01), LED/Light (SMLIT01), Contact Closure (SMCC01) and Voltage (SMVLT01) for additional application flexibility of the ISM4.

HOME THEATER SYSTEM (Figure 4)

ISM4

1.Plug the included 12VDC Power Supply 2.1mm coaxial plug into the Power Jack on the ISM4 Rear Panel.

2.Plug the Power Supply into an unswitched AC Outlet.

Source 1 (A/V Receiver)

1.Cut the plug off the end of an unregulated 12VDC Power Supply. (An unregulated power supply’s decay time, 12V to 0V, is faster than a regulated supply, netting faster system response.) Strip approximately 1/4” off the jacket and twist the strands so that there are no loose ends that can cause shorts.

2.Connect the stripped ends to the appropriate terminals on the SMVLT01 Sensor. Maintain proper polarity, typically white stripe (+12V) to the ‘+’ terminal, black wire (GND) to the ‘-‘terminal.

3.Plug the power supply into a switched AC outlet on the A/V Receiver.

4.Plug the SMVLT01 3.5mm mini plug into the ISM4 Source 1 “Sense In” Jack.

5.Turn the A/V Receiver ON. The SMVLT01 Status LED should illuminate red. (The Source 1 Status LED on the ISM4 Front Panel should also illuminate solid green. For now, disregard any other front panel LED activity.)

6.Turn the A/V Receiver OFF. The SMVLT01 Status LED should turn off. If it does not turn off, adjust the sensitivity to the point where the Status LED turns off. (The Source 1 Status LED on the ISM4 Front Panel should also turn off. For now, disregard any other front panel LED activity.)

7.Remove the protective backing from an IR Emitter head. Carefully attach the emitter over the IR eye of the A/V Receiver. If the eye is not obvious, shine a small flashlight into the faceplate to locate it or refer to the product manual.

8.Carefully pull the emitter wire to the back of the A/V Receiver and over to where the ISM4 is located. Be careful not to pinch the wire between components.

9.Plug the Emitter 3.5mm mini plug into the ISM4 Source 1 “IR Out “Jack.

10.Label the sensor and emitter wires for reference.

Source 2 (DVD Player)

1.Using a shielded male to male RCA-RCA video cable (Composite Video Cable) with gold ends, connect the Composite Video Output of the DVD Player to the SMVID01 RCA sensor head.

ISM4 specifications

The Xantech ISM4 is an innovative multi-zone audio distribution system designed to enhance the listening experience across various environments. This advanced model is particularly suitable for residential and commercial applications, where high-quality audio distribution is crucial.

One of the standout features of the ISM4 is its ability to manage up to four separate audio zones. This means users can enjoy different audio sources in different areas simultaneously, catering to diverse preferences and activities. The system supports various audio sources, including streaming services, local media players, and traditional radio, which can all be directed to any zone, providing flexibility and convenience.

The ISM4 utilizes sophisticated digital signal processing (DSP) technology to ensure that audio quality is always at its peak. The DSP allows for customizable audio settings such as equalization, volume adjustment, and audio balance, enabling users to tailor their listening experience to their unique preferences and room characteristics. This level of customization ensures that whether it’s background music in a living room or dynamic sound in a home theater, the audio output is optimized.

Another significant characteristic of the Xantech ISM4 is its user-friendly interface. The system can be controlled via a dedicated app or physical switches, offering versatility in how users interact with their audio setup. The app is compatible with both iOS and Android devices, making it accessible to a wide range of users. Furthermore, the ISM4 can be easily integrated with third-party control systems and home automation solutions, allowing for seamless synchronization with other smart home technology.

Connectivity is another strong point of the ISM4. It supports various input options, including HDMI, optical, and analog connections, allowing users to connect a variety of audio sources without hassle.

Reliability and durability are ensured through robust build quality, making the ISM4 suitable for long-term use in various environments. With its combination of advanced audio distribution capabilities, user-friendly features, and robust connectivity, the Xantech ISM4 stands out as a leading choice for those looking to elevate their audio experience in both home and commercial settings. Users can expect exceptional sound quality, seamless integration, and the flexibility to enjoy audio the way they want.