Operation, Controls Fig | Hobart ML-104586 manual

OPERATION

WARNING: ROTATING KNIVES INSIDE. ALWAYS USE PUSHER PLATE. KEEP HANDS OUT.

Proper assembly of the FP350, including selection of the appropriate cutters, is necessary for correct operation of the food processor. Refer to the Cutting Tool Guide for sizes of cutters and refer to the appropriate operation instructions.

CONTROLS (Fig. 1)

START (Green) — Push to start.

STOP (Red) — Push to stop.

Interlock switches prevent the food processor from operating when the feed cylinder is out of position or the pusher plate is raised above the feed cylinder. If these features do not function as described, contact your local Hobart Service Office.

During operation, when the pusher plate is fully raised above the feed cylinder, the food processor stops and allows the pusher plate to be rotated clockwise for loading. To continue operation, rotate the pusher plate counterclockwise until it is directly above the feed cylinder. As the pusher plate begins to lower into the feed cylinder, the food processor will restart — you do not need to push the green START switch unless STOP was pressed.

Always push the red STOP switch before changing cutters or cleaning.

FITTING AND REMOVING THE PUSHER PLATE

1.To fit the pusher plate, you MUST hold it with both hands in the exact positions shown in Fig. 2. Hold it with the pusher plate handle to the left of the machine (as you face the front). Position the pusher plate shaft against the bracket on the food processor.

2.Push the pusher plate down on the shaft with your right hand as far as it will go (Fig. 3). The pin on the shaft of the pusher plate must slide into the slot in the bracket.

Fig. 2

Fig. 3

– 5 –

ML-104586 specifications

Hobart ML-104586 is a highly regarded piece of equipment within the commercial kitchen sector, known for its robust design and exceptional functionality. This machine is a part of Hobart's extensive line of innovative foodservice solutions, which cater to the needs of restaurants, catering businesses, and other food preparation facilities.

One of the defining characteristics of the Hobart ML-104586 is its durable construction. Made with high-grade stainless steel, this machine is not only resistant to rust and corrosion but also easy to clean, ensuring compliance with strict hygiene standards in food service environments. Its solid build quality guarantees reliability, even under heavy use, making it a favorite among culinary professionals.

The Hobart ML-104586 incorporates advanced slicing technology, allowing operators to slice various types of food with precision and efficiency. The machine features a powerful motor that delivers consistent performance, regardless of the load, ensuring that meal prep can be completed quickly without sacrificing quality. This highlights the machine's ability to improve workflow and productivity in busy kitchens, where time is of the essence.

Another significant aspect of the ML-104586 is its user-friendly design. The machine is engineered with intuitive controls that make it easy for staff to operate, reducing the learning curve for new users. Furthermore, safety features such as emergency shut-off switches and protective covers enhance the machine's overall usability, contributing to a safer work environment.

The variable speed settings on the Hobart ML-104586 allow for versatility in food preparation. Operators can adjust the slicing speed, which is beneficial when working with different types of ingredients, ensuring optimal results with meats, cheeses, and vegetables. This adaptability makes it an invaluable asset in any kitchen setting.

Additionally, the ML-104586 boasts a compact footprint, making it suitable for kitchens with limited space. Its design ensures that it can easily be integrated into existing kitchen layouts without requiring extensive modifications or additional countertop space.

In conclusion, the Hobart ML-104586 stands out as a top-tier solution for commercial food preparation needs. Its durable construction, advanced slicing technology, user-friendly features, and versatile performance underlie its reputation as a reliable choice for culinary professionals aiming to enhance their kitchen operations. Whether used in a busy restaurant or a catering service, the Hobart ML-104586 is engineered to meet the demands of the food service industry, ensuring efficiency and excellence in every slice.