INSTALLING THE BATTERY PACK AND CARD

CAUTION

Close the battery/card compartment cover securely

i If the battery/card compartment cover is not closed or is not closed completely, the camera will no longer be waterproof. When closing the battery/card compartment cover, make sure that no foreign object such as sand, hair, dust, etc. is caught in the seal.

Do not charge the battery pack immediately after the camera has been in continuous use for a long time

i The battery pack becomes hot when the camera is used continuously for a long time. If you attempt to charge the battery pack in this state, the charge indicator may flash red and it may not be possible to charge the battery pack. Wait until the battery pack has cooled down before attempting to charge it.

Does the battery pack appear swollen?

i The lithium-ion battery used in this camera may expand slightly when stored in a hot environment or repeatedly used, but this is not a safety hazard.

HINT

About the internal backup battery

i This camera’s internal battery serves to maintain the date and time settings, as well as the shooting settings. The backup battery will be fully charged when the battery pack is kept in the camera continuously for about 2 days. In the fully charged state, the backup battery will maintain the camera settings for about 7 days.

When not using the camera for a long time, remove the battery pack

i A small amount of power is still used even if the camera is turned off, and it is therefore recommended that the battery pack be removed from the camera if it is not going to be used for a long time. Note that when the battery pack is removed for a long period, the time and date settings may be cleared. Before using your camera again, be sure to confirm that the camera settings are correct.

To prolong the life of the battery pack

i Although the battery pack is an expendable item, you can maximize the life of the battery by heeding the following suggestions.

hDo not leave the battery under the hot summer sun or exposed to other

high-temperature environments.

hDo not continually recharge the battery when it is already fully charged. After fully charging it once, for example, use it for a while to partially

discharge it before recharging it again.

hWhen the battery is not to be used for a long time, if possible store the partially charged (not fully charged) battery in a cool environment.

27English

Page 44
Image 44
Sanyo VPC-E2 instruction manual Installing the Battery Pack and Card, Close the battery/card compartment cover securely