Install the card

The card can be used after it has been formatted with the camera (page 148).

1 Open the battery/card

Card slot

compartment cover.

 

2 Insert the card.

hFirmly insert the card until it

clicks into place.

1 Open

 

2 Insert

3 Close the battery/card compartment cover.

<When removing the card...>

1 Open

h To remove the card, press it

2 Push

down, and then release. The

 

card will protrude slightly, and

 

you can then pull it out.

 

 

3 Pull out

SETUP

English 28

Page 45
Image 45
Sanyo VPC-E2 instruction manual Install the card, When removing the card