Sanyo VPC-E2 Specify the start point of the extract, Procedure Play, Pause, Accelerated playback

EDITING VIDEO CLIPS

4 Specify the start point of the extract.

hUse the procedure below to specify the frame from which the video clip extract will start.

hPlay the video clip until approximately the desired point, pause the video clip, then play the video clip one frame at a time, stopping at the

start point of the extract. This will be the first frame of the extract.

hIf the start point of the video clip is also the start point of the extract,

proceed to step 5.

<Procedure>

Play:

After pausing playback, press and hold the [H] button for about 2 seconds for forward playback, or the [G] button for reverse playback.

Pause:

During playback, press the SET button.

Accelerated playback:

During playback, press the [G] or [H] button to change the playback speed.

Single frame:

After pausing playback, press the [H] button to move forward one frame, or the [G] button to move back one frame.

5 Press the [T/]] button. Approximate playback time

hThe start point of the video clip

	extract is set, and the screen to	CUT	00:00:06
	specify the end point appears.
h Specify the end point of the
	extract by following the same
	procedure as in step 4.
<When joining the first and latter
portions>
1	Press the [W/P] button.	SAVE

hEach time the [W/P] button

is pressed, the sections to	End point
delete and the sections to	Portion to be deleted
save are reversed.

2Specify the end point of the extract. The frame following the end point of the extract will be the start point of the latter portion to be joined.

115English