Sanyo VPC-E2 instruction manual ISO Sensitivity

ISO SENSITIVITY

With the initial settings, the ISO sensitivity is automatically set according to the brightness of the subject. However, the ISO sensitivity can be set to a fixed setting.

1 Display the NORMAL Mode Shooting Menu (page 37), select “ISO”, and press the SET button.

=: The ISO sensitivity is set automatically (video clip recording: ISO equivalent to ISO 50 to 1600; still image shooting: ISO 50 to 400).

*: Sets sensitivity to ISO 50 (video clip high sensitivity recording: ISO 100).

u: Sets sensitivity to ISO 100 (video clip high sensitivity recording: ISO 200).

v: Sets sensitivity to ISO 200 (video clip high sensitivity recording: ISO 400).

w: Sets sensitivity to ISO 400 (video clip high sensitivity recording: ISO 800).

6: Sets sensitivity to ISO 800 (video clip high sensitivity recording: ISO 1600).

-: Sets sensitivity to ISO 1600 (video clip high sensitivity recording: ISO 3200).

* The indicated ISO value is the standard output sensitivity.

2 Select the desired icon, and press the SET button.

hThis completes the ISO sensitivity setting.

HINT

i By setting a higher ISO sensitivity, you can set faster shutter speeds and capture images in darker locations, but noise in the captured images may increase or the images may be irregular.

i By assigning an operation shortcut to an arrow button (page 135), you can change the ISO setting from the Shooting Screen.

CAUTION

Does the image appear to flicker when recording a video clip?

i If recording a video clip under fluorescent lights with the ISO sensitivity set to wor higher, a noticeable flicker may appear in the image.

NORMAL/SHOOTING

English 98