Sanyo VPC-E2 instruction manual Operation Sounds, If Turn ON/OFF or Audio Guide is selected

OPERATION SOUNDS

3 Press the [T/]] or [W/P] button to select the desired setting, and press the SET button.

hThe screen to select operation sounds appears.

<If “TURN ON/OFF” or “AUDIO GUIDE” is selected>

hThe respective screen to enable or disable the sound appears. h Press the [T/]] or [W/P] button to select the desired setting,

and press the SET button.

ON: Activates the sound.

OFF: Deactivates the sound.

<If “SHUTTER” or “KEY SW” is selected>

hThe screen to select the operation sounds appears. h Select from 8 different sounds (A to H).

h You can press the [H] button to preview the selected operation sound.

h If “OFF” is selected, no sound is produced.

h Press the [T/]] or [W/P] button to select the desired setting,

and press the SET button.

<If “OPERATION VOL” was selected>

hThe screen to select the volume for the operation sounds appears. h You can select an operation sound volume from 1 (minimum) to

7 (maximum).

h Press the [T/]] or [W/P] button to select the volume, and press the SET button.

4 Press the MENU button.

hThe operation sound settings are completed.

HINT

i If you keep the MENU button pressed and turn on the power, the screen to turn the operation sounds ON/OFF appears at once. You may find this a convenient procedure to disable the operation sounds in places you do not want them to be audible.

133English