NOTE

k Storing and maintaining your camera

i Do not leave the camera unwashed after it has been immersed in salt water or if salt water is adhering to it. Doing so may cause corrosion and discoloration of the plating, as well as deterioration of the camera’s waterproof capability.

i After the camera has been used in water, use fresh water to wash it. Never use soap or detergent to clean the camera, as doing so will cause deterioration of the camera’s waterproof capability.

i After washing the camera, take care to completely drain it, and use a dry cloth to wipe off any drops of water adhering to it (page 67).

i Do not leave the camera in an environment colder than 0 °C (32°F) or warmer than 40 °C (104°F), as doing so may cause deterioration of the camera’s waterproof capability.

i Waterproof seals are used in this camera. It is recommended that the waterproof seals be replaced every year with new ones. For replacing the seals, please consult your dealer.

*Please note that there is a fee for replacing the waterproof seal.

k Other cautions

i Do not subject the camera to severe jolts, as doing so may deform the battery/card compartment cover or camera body, thus compromising its waterproof capability. If the camera has been subjected to a strong jolt, please consult with your dealer.

HINT

What is “JIS IPX8” (formerly “JIS protection grade 8”)?

i “JIS IPX8” specifies that a device is protected against the effects of continuous immersion in water.

English xvi

Page 17
Image 17
Sanyo VPC-E2 instruction manual Storing and maintaining your camera, What is JIS IPX8 formerly JIS protection grade 8?