TURNING THE CAMERA ON AND OFF

Turning off the camera

1 Press the ON/OFF button for at least 1 second.

hThe camera turns off.

hTo turn off the camera while it is in the shooting mode or power save mode, press the ON/OFF button for at least 1 second.

HINT

To immediately activate the power save function

i Press the ON/OFF button briefly to activate the power save function.

If the date and time setting has been

completed (page 32)...

i The current time is shown on the monitor when the camera is turned on.

About the standby mode

i To turn off the camera only briefly, you

can close the monitor unit to put the camera in the standby mode. The standby mode uses almost no power. When the monitor unit is opened again, the camera turns on immediately and you are ready to shoot or view images without any delay.

CAUTION

If the K icon appears...

i When a picture is taken, the date and time it was captured are recorded with it. If the date and time settings have not been completed (page 32), the date and time cannot be recorded with the captured images. For this reason, immediately after the camera is turned on, the “Set date and time” screen appears. To have the date and time recorded with the images, please complete this setting before capturing images.

31English

Page 48
Image 48
Sanyo VPC-E2 instruction manual Turning the Camera on and OFF, Turning off the camera