General

Installation, Operation and Care of

Model LT1 DISHWASHER

SAVE THESE INSTRUCTIONS

The Model LT1 Dishwasher is a low temperature (140°F recommended, 120°F minimum), chemical sanitizing, rack-type dishwasher for use with accessory 20" x 20" racks. It is equipped with a 3⁄4 horsepower thermally protected (internal) pump motor. The motor must cool to restart the pump.

The revolving stainless steel ball bearing wash / rinse arms above and below provide thorough distribution of water jets to all dishware surfaces. Arms are easily removable for cleaning and are interchangeable. Stainless steel tubing connects upper and lower systems.

All three doors open together when the spring counter-balanced handle is raised. Durable door glides provide easy opening and closing.

The LT1 can wash up to 40 racks per hour. Water usage is 1.7 gallons per rack.

After initial manual fill, the machine automatically washes a rack of dishes, drains the wash water, and then refills with fresh water for the rinse cycle. The rinse water remains in the machine for the next wash cycle. At the proper time during each cycle, an appropriate amount of detergent, rinse aid, and sanitizer chemicals are pumped into the wash tank.

Cycle timing is as follows:

. . . . . . . .Wash	40	seconds
Drain	10	seconds
Flush	3	seconds
Fill	9	seconds
Rinse	20	seconds

The stainless steel front panel is available as an option.

MODEL LT1 DISHWASHER

SHOWN WITH OPTIONAL FRONT PANEL

– 3 –