OPERATION
CAUTION: Items made of pewter, aluminum, and silver will be attacked by the sodium hypochlorite sanitizing agent (liquid bleach) used in this machine and therefore should not be washed in it.
In addition to these detailed instructions, brief instructions for operation and cleaning can be found on the front of the control box.
CONTROLS (Fig. 11)
DETERGENT | SANITIZER |
| RINSE AID |
|
|
|
|
| |||
PRIMING SWITCH | PRIMING SWITCH |
| PRIMING SWITCH |
| POWER SWITCH |
|
|
|
|
|
|
DRAIN/FILL SWITCH
CYCLE LIGHT
COUNTER
THERMOMETER
Fig. 11
The POWER switch turns the machine on and off.
The DETERGENT, SANITIZER, and RINSE AID priming switches are used to prime the delivery pumps. To prime the pumps, press and hold each priming switch until the corresponding chemical reaches the end of the delivery tube.
The DRAIN/FILL switch, when pressed and held on FILL, opens the fill valve and allows water to flow into the dishwasher. The fill valve will remain open as long as the switch is pressed.
The DRAIN/FILL switch, when pressed and held on DRAIN, opens the drain valve and allows water to drain out of the dishwasher. The drain valve will remain open as long as the switch is pressed.
The CYCLE LIGHT indicates when a washing cycle is in progress.
The THERMOMETER indicates water temperature in the dishwasher sump.
The COUNTER indicates the number of cycles that have been run.
– 9 –