Frymaster 8196428 manual

Page 8

5.Raise the element and remove the securing probe bracket and metal tie wraps that secure the probe to the element (see illustration below).

6.Gently pull on the temperature probe and grommet, pulling the wires up the rear of the fryer and through the element tube assembly.

7.Insert the replacement temperature probe (wires first) into the tube assembly ensuring that the grommet is in place. Secure the probe to the elements using the bracket which was removed in Step 5 and the metal tie wraps which were included in the replacement kit.

8.Route the probe wires out of the tube assembly following the element wires down the back of the fryer through the Heyco bushings to the 12-pin connector C-6. Secure the wires to the sheathing with wire ties.

9.Insert the temperature probe leads into the 12-pin connector C-6 (see illustration below). For full-vat units, the red lead goes into position 3 and the white lead into position 4 of the connector.

10.Secure any loose wires with wire ties making sure that the lead wires will not interfere with the movement of the springs. Rotate the elements up and down making sure that movement is not restricted and that the wires are not pinched.

11.Reinstall the tilt housing and back panels, reposition the fryer under the exhaust hood, and reconnect it to the electrical power supply to return the fryer to service.

1-4

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Hour Service Hotline Yfpre Series Electric FryersPage Page Yfpre Series Electric Fryers Table of Contents Replacing Component Box Components GeneralReplacing a Controller Replacing a High-Limit Thermostat Replacing a Temperature Probe Page Replacing a Heating Element Replacing Contactor Box Components Replacing a Frypot Page Drain Safety Switch Page Disconnect flexlines indicated by the arrows Replacing the Filter Transformer or Filter Relay Interface Board Diagnostic Chart Diagnostic LED LegendProbe Resistance Chart Probe Resistance ChartComponent Wiring Standard Wiring Yfpre Tilt Switch Wiring Terminal Block Wiring Contactor Delta Configuration, 3 Phase Contactor Single Phase Yfpre Series Electric Fryers Parts List AccessoriesCabinetry 106-9431 Drain Components Not illustrated Tilt Switch Assembly Lane Controller Contactor Box Component Box Contactor Box Harness Assembly, MDI, 9-Pin Right Element Component Box to Filter Pump HarnessMain Wiring Harnesses Component Box and Filter Pump Filtration System Components RingPkg. of 5 used with Item Frypot and Associated Parts Wiring Connectors and Pin Connectors Fasteners Nuts, Bolts, Screws, Washers This page Intentionally Left Blank Service Hotline

8196428 specifications

The Frymaster 8196428 is a high-performance commercial fryer designed for efficiency and reliability in bustling kitchen environments. Known for its robust construction and innovative features, the Frymaster 8196428 stands out as a preferred choice for restaurants, cafeterias, and fast-food outlets.

One of the key characteristics of the Frymaster 8196428 is its advanced heating technology. This fryer utilizes a powerful heating system that ensures rapid temperature recovery, allowing for consistent cooking results, even during peak hours. This feature is essential in maintaining food quality and minimizing cook times, which is crucial in a fast-paced setting.

The Frymaster 8196428 is equipped with a digital control system that simplifies the frying process. The precise digital thermostat allows for accurate temperature settings, ensuring that the oil remains at the optimal frying temperature. This not only enhances the flavor and texture of the food but also contributes to food safety by preventing undercooking or overcooking.

Another significant feature is its efficient oil management system. The Frymaster 8196428 is designed with a high-capacity oil tank, allowing for extended frying sessions without the need for frequent oil changes. This not only saves costs but also reduces waste, making it an environmentally friendly option. Additionally, the fryer’s oil filtration system helps in prolonging oil life by filtering out food particles, ensuring that the oil remains clean and effective for longer periods.

The construction of the Frymaster 8196428 is another highlight. Made with durable stainless steel, the fryer is built to withstand the rigors of everyday use while remaining easy to clean. Its compact design ensures it can fit seamlessly into various kitchen layouts, making it an adaptable choice for different business sizes.

Safety features are paramount in the Frymaster 8196428’s design. It incorporates built-in safety mechanisms, such as automatic shut-off functions and cool-to-the-touch handles, to protect users from accidental burns and other hazards.

In summary, the Frymaster 8196428 is an exemplary commercial fryer that combines advanced technology, efficiency, and user-friendly features. Its precise temperature control, high-capacity oil management system, durable construction, and safety measures make it a reliable choice for any commercial kitchen aiming to serve high-quality fried foods with ease and consistency.
Top Page Image Contents