ANTI-TIP Device Installation Instructions

ANTI-TIP DEVICE INSTALLATION INSTRUCTIONS

NOTE: A risk of range tip over exists if the appliance is not installed in accordance with the installation instructions provided. The proper use of this device minimizes the risk of TIP-OVER. In using this device the consumer must still observe the safety precautions as stated in the USE and CARE MANUAL and avoid using the oven door and/or lower drawer as a step stool.

Installation instructions are provided for wood and cement in either floor or wall. Any other type of construction may require special installation techniques as deemed necessary to provide adequate fastening of the ANTI-TIP bracket to the floor or wall.

STEP 1 - Locating The Bracket (see figure 5)

A.Determine where either the right or left rear “edge” of the range will be located and mark the floor or wall.

B.Place the BRACKET 15/16 from the marked “EDGE” toward center of opening and against the back wall as shown in figure 5.

C.Use the bracket as a template and mark the required holes, as shown in figure 5 for the type of construction you will be using.

STEP 2 - Anti-Tip Bracket Installation

A.Wood Construction:

1.Floor: Locate the center of the two holes identified in figure 5 as “HOLES FOR FLOOR”. Drill a 1/8 pilot hole in the center of each hole (a nail or awl may be used if a drill is not available). Secure the ANTI-TIP bracket to the floor with the two screws provided. Proceed to STEP 3.

2.Wall: Locate the center of the two holes identified in figure 5 as “HOLES FOR WALL. Drill an angled

1/8 pilot hole in the center of each hole as shown in figure 6. (A nail or awl may be used if a drill is not available). Secure the ANTI-TIP bracket to the wall with the two screws provided as shown in figure 6. Proceed to STEP 3.

B.Cement or Concrete Construction:

1.Suitable screws for concrete construction can be obtained at a hardware store. Drill the required size hole for the screws obtained into the concrete at the center of the holes identified in figure 5 as “HOLES FOR FLOOR”. Secure the ANTI-TIP bracket to the floor. Proceed to STEP 3.

STEP 3 - Range Installation

A.Align the range to its designated location and slide it back into position. Make sure that the leveling foot is fully inserted into and secured by the ANTI-TIP bracket. Note: A minimum clearance of 1/4 is required between the range and the leveling foot that will engage the ANTI-TIP bracket, see figure 6.

B.For safety considerations as well as optimum performance adjust the range so that it is level. This may be checked by placing a spirit level or a large pan of water on the cooktop or the oven rack. Jenn-Air ranges require total removal from cabinet before an adjustment can be made.

C.To check the range for proper installation of the anti-tip bracket: Use a flashlight and look underneath the bottom of the range to see that one of the rear leveling legs is engaged in the bracket slot.

D.Proceed with the remainder of the installation instructions.

FIGURE 5

FIGURE 6

-5-

Range specifications

The Jenn-Air range is synonymous with high-end kitchen appliances, blending sophistication and innovative technology. As a leader in upscale cooking solutions, Jenn-Air focuses on creating ranges that elevate the culinary experience while maintaining both style and functionality.

One of the standout features of Jenn-Air ranges is their sleek and modern design. Crafted from premium stainless steel, they offer a contemporary aesthetic that seamlessly integrates into any kitchen decor. The brushed metal finish not only enhances the appearance but also provides durability and ease of cleaning. The professional-grade look, paired with customizable options, allows consumers to personalize their kitchen environment to match their tastes.

Performance is another hallmark of the Jenn-Air range. Featuring powerful burners and extensive temperature control, these ranges allow chefs to cook with precision. The range typically includes a combination of gas and electric cooktops, providing versatility for different cooking styles. The high BTU burners deliver rapid heat for boiling, while simmer burners enable delicate food preparation.

One of the most notable technologies found in Jenn-Air ranges is their Dual Fuel option. This feature combines the benefits of gas cooking for the cooktop with the consistent heat of an electric oven. This combination is favored by many culinary enthusiasts for its ability to deliver optimal baking results. The oven also includes advanced convection technology, which circulates hot air for even cooking and reduced cooking times.

The Touch-Control technology in Jenn-Air ranges is another impressive attribute, allowing users to easily change settings with just a tap. The intuitive interface provides precise control over cooking temperatures and times, enhancing the cooking experience and reducing the potential for errors.

In addition to performance and design, Jenn-Air ranges also emphasize safety and convenience. Features like auto shut-off, child safety locks, and self-cleaning ovens offer peace of mind for families while maintaining a user-friendly experience. Connectivity options are available as well, allowing owners to control their ranges remotely through smartphone apps, enabling adjustments even when away from the kitchen.

Overall, Jenn-Air ranges embody luxury and performance, catering to both the aesthetic and functional demands of modern kitchens. With their elegant designs, powerful cooking capabilities, and cutting-edge technologies, Jenn-Air continues to be a preferred choice for those who seek to enhance their culinary adventures at home.