Make Gas Connection, Complete Connection

Make Gas Connection

WARNING

Explosion Hazard

Use a new CSA International approved gas supply line.

Install a shut-off valve.

Securely tighten all gas connections.

If connected to LP, have a qualified person make sure gas pressure does not exceed 14" (36 cm) water column.

Examples of a qualified person include:

licensed heating personnel,

authorized gas company personnel, and authorized service personnel.

Failure to do so can result in death, explosion, or fire.

1.Apply pipe-joint compound made for use with Natural and LP gas to the smaller thread ends of the flexible connector adapters (see C and G in the following illustration).

2.Attach one adapter to the gas pressure regulator and the other adapter to the gas shutoff valve. Tighten both adapters.

3.Use a ¹⁵⁄₁₆" combination wrench and channel lock pliers to attach the flexible connector to the adapters. Check that connector is not kinked.

4.Install the pressure regulator with the arrow pointing up toward the bottom of the cooktop base and in a position where you can reach the regulator access cap.

A. Access cap

B. Rear of cooktop

C. Gas pressure regulator

D. Up arrow. Regulator must be installed with arrow pointing up to cooktop bottom.

IMPORTANT: All connections must be wrench-tightened. Do not make connections to the gas regulator too tight. Making the connections too tight may crack the regulator and cause a gas leak. Do not allow the regulator to turn on the pipe when tightening fittings.

Use only pipe-joint compound made for use with Natural and LP gas.

Do not use TEFLON® tape. You will need to determine the fittings required depending on your installation.

Complete Connection

1.Open the manual shutoff valve in the gas supply line. The valve is open when the handle is parallel to the gas pipe.

Typical flexible connection.

	B	A. Manifold entrance
	C	B. Gas pressure regulator
	C	C. Use pipe-joint compound.
	D	D. Adapter (must have ½" male pipe thread)
		E. Flexible connector
		F. Adapter
	E	G. Use pipe-joint compound.
	E	H. Manual gas shutoff valve
		H. Manual gas shutoff valve
		I. ½" or ¾" gas pipe
	F
	G
	H
	I

A. Closed valve

B. Open valve

2.Test all connections by brushing on an approved noncorrosive leak-detection solution. If bubbles appear, a leak is indicated. Correct any leak found.

3.Remove surface burner caps and grates from parts package. Align notches in burner caps with pins in burner base. Burner caps should be level when properly positioned. If burner caps are not properly positioned, surface burners will not light.

Place burner grates over burners and caps.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

4.Plug into a grounded 3 prong outlet.

W10526003A specifications

The Jenn-Air W10526003A is a premium appliance component designed to enhance the performance and functionality of modern kitchens. This high-quality product is primarily a replacement part for various Jenn-Air refrigerator models, ensuring that your appliance remains efficient and reliable over time. Understanding the main features, technologies, and characteristics of the W10526003A can help homeowners and appliance repair technicians make informed decisions when it comes to appliance maintenance.

One of the standout features of the W10526003A is its durable construction. Made from high-quality materials, this component is designed to withstand the rigors of daily use while maintaining its functionality. This resilience is essential for homeowners who rely on their refrigerators to keep food fresh and safe to consume.

The W10526003A is engineered with advanced technology to ensure optimal performance. It is designed to fit specific Jenn-Air models seamlessly, contributing to the overall efficiency of the appliance. The precise engineering behind this part reduces the likelihood of malfunctions, providing peace of mind for users who depend on their refrigerator for food preservation.

Another significant characteristic of the Jenn-Air W10526003A is its ease of installation. This component can be swapped out with minimal effort, making it accessible for DIY enthusiasts and professional repair technicians alike. Clear instructions are typically provided, ensuring that users can complete the installation process without hassle.

In addition to its durable and efficient design, the W10526003A is also built with energy efficiency in mind. By ensuring that the refrigerator operates at optimal levels, this replacement part can contribute to lower energy consumption, which is not only beneficial for the environment but also decreases utility bills.

Moreover, the W10526003A is compatible with a range of Jenn-Air refrigerator models, making it a versatile choice for various configurations. This compatibility allows users to confidently select this part, knowing that it will work effectively with their specific appliances.

In conclusion, the Jenn-Air W10526003A represents a high-quality replacement option for those looking to maintain or repair their refrigerators. With its durable construction, advanced technology, easy installation process, and energy efficiency, it stands out as a reliable choice for enhancing the overall performance of Jenn-Air appliances. By investing in this component, homeowners can ensure that their kitchen remains a well-functioning hub for food storage and preparation.