Testing Procedures

!WARNING

To avoid risk of electrical shock, personal injury or death; disconnect power and gas to oven before servicing, unless testing requires power and/or gas.

Component Testing

Illustration			Component	Test Procedure	Results
			Oven light socket	Remove one wire from receptacle
				and test resistance of terminals	Indicates continuity with bulb screwed in.
				Measure voltage at oven light	120 VAC, see wiring diagram for terminal
					identification.
					If no voltage is present at oven light, check
					wiring or light switches.
			Autolatch assembly	Disconnect wires and test for	See wiring diagram for schematic layout.
			with switch	continuity per wiring diagram.	Access assembly by removing left side
					panel.
				Refer to Parts Manual for correct
				autolatch switch associated with the
				correct manufacturing number.
5 K btu			270° valve	Verify gas is supplied.
9.2 K btu (2)
16 K btu				Adjust set screw for simmer control.
12 K btu
			Spark 270° switch	Test for voltage at terminals	120 VAC
				Disconnect wiring and check for
				continuity in LITE position	Continuity in LITE position.
			Spark ignition	Test for resistance of spark lead	Continuity
			electrode
				Test ignitor to chassis	No continuity from ignitor to chassis.
5 K btu			Top surface burner	Verify gas is supplied	Check for obstructions in burner ports.
9.2 K btu (2)
16 K btu				Verify burner cap is positioned
12 K btu				correctly.
L	A	B	Spark module 4 + 0	Test for voltage at terminals L and N	120 VAC
N		A1 B1		Check polarity and ground	See wiring diagram
N		A1 B1
			Temperature sensor	Measure resistances	Approximately 1100 Ω at room temperature
					75°F.
			Pressure regulator	Verify gas pressure (W.C.P.).	5" Natural
				If on LP service verify proper gas	10" LP/propane
				If on LP service verify proper gas
				supply conversion.
			Door plunger switch	Remove switch from unit and
				measure the following points:
				C NO	Plunger in infinite, Plunger out continuity.
			Bake element, Upper	Disconnect wire leads to element
				and measure resistance of terminals	Approximately 31.0 Ω, if not replace.
				Measure voltage at bake element	240 VAC, see wiring diagram for terminal
					identification. If no voltage is present at
					bake element check wiring.
			Bake element, Lower	Disconnect wire leads to element
				and measure resistance of terminals	Approximately 21.3 Ω, if not replace.
				Measure voltage at bake element	240 VAC, see wiring diagram for terminal
					identification. If no voltage is present at
					bake element check wiring.
			Broil element, Upper	Disconnect wire leads to element
				and measure resistance of terminals	Approximately 25.4 Ω, if not replace.
				Measure voltage at broil element	240 VAC, see wiring diagram for terminal
					identification. If no voltage is present at
					broil element check wiring.

16023417

JDR8895AAB/S/W, JDR8895ACS/W specifications

The Jenn-Air JDR8895ACS/W and JDR8895AAB/S/W are two premium model double oven ranges that exemplify luxury kitchen appliances. These models are designed for those who appreciate culinary craftsmanship, combining elegance with cutting-edge technology. Both offerings provide spacious interiors, allowing chefs to prepare multiple dishes simultaneously, a crucial feature for anyone who enjoys entertaining.

One of the standout features of the Jenn-Air JDR8895 series is its impressive dual-fuel capability, providing the precision of gas cooking with the consistent results of an electric oven. The gas burners offer a variety of power levels, accommodating different cooking techniques, from searing meats to simmering delicate sauces. The oven uses an electric convection system that circulates hot air, ensuring even baking results, which is particularly beneficial for baking pastries or casseroles.

Another defining characteristic is the sleek and modern design, which features a stainless steel exterior that not only enhances the kitchen's aesthetic but also promotes durability and easy cleaning. The intuitive control panel offers smooth, touch-sensitive controls for various settings, making it user-friendly even for novice cooks.

Among the technologies incorporated in the Jenn-Air JDR8895 models is the advanced temperature probe, which allows for precise monitoring of internal temperatures without opening the oven door. This feature is invaluable for achieving perfectly cooked meats and maintaining optimal oven conditions.

In addition to performance features, these ranges are equipped with a self-cleaning mode that simplifies maintenance, allowing users to spend more time cooking rather than cleaning. The built-in Wi-Fi connectivity enables remote monitoring and control of the range through a compatible smartphone app, offering convenience for the modern home chef.

In terms of safety, these models are designed with features such as automatic shut-off and child lock options, providing peace of mind in busy kitchens.

Overall, the Jenn-Air JDR8895ACS/W and JDR8895AAB/S/W range models embody sophistication, functionality, and technology, appealing to anyone looking to elevate their culinary experience. These dual-fuel ranges not only meet high-performance standards but also introduce smart cooking solutions that make every meal an occasion to remember.