Jenn-Air JDR8895ACS/W Oven Door Hinge, Regulator, Rocker Switch, Indicator Lamps, Spark Module

Page 26

Disassembly Procedures

!WARNING

To avoid risk of electrical shock, personal injury, or death: disconnect electrical and gas supply before servicing.

Oven Door Hinge

NOTE: Removal of range from installation position is required.

1.Disconnect power before servicing.

2.Remove oven door, see "Oven Door(s)-Door Removal" procedure.

3.Remove maintop, see "Maintop Removal" procedure. (Perform steps 1 – 6.)

4.Remove appropriate side panel (left or right), see "Side Panel" procedure.

5.Remove screws securing hinge to front frame flange.

6.Complete hinge assembly may be removed.

7.Reverse procedure to reassemble.

NOTE: The door hinges are colored coded for ease of installation. The upper spring hook is gold and the lower spring hook is white.

4.Remove screws securing top rear access panel to chassis.

5.Disconnect and label wire terminals from spark module.

6.Remove spark module from secured position.

7.Reverse procedures to reassemble.Gas Valve

NOTE: Removal of range from installation position is required.

1.Disconnect power before servicing.

2.Remove range from installation position, see "Move and/or Replacing Range" procedure.

3.Remove screws securing bottom rear access panel to chassis.

4.Remove screws securing top rear access panel to chassis.

5.Disconnect tubing from gas valve.

6.Disconnect and label wire terminals from gas valve.

7.Remove screws securing gas valve to chassis.

8.Reverse procedures to reassemble.

NOTE: Perform gas leak test.

Regulator

NOTE: Removal of range from installation position is required.

1.Disconnect power before servicing.

2.Slide range forward out of installation position to gain access to components.

3.Disconnect tubing from regulator.

4.Remove screws securing bracket to back of unit.

5.Remove screws securing regulator to support bracket.

6.Reverse procedures to reassemble.

NOTE: When reconnecting supply line to regulator use pipe dope compound to seal the connection.

NOTE: Perform gas leak test.

Rocker Switch

1.Disconnect power before servicing.

2.Remove infinite switch control knobs located on the backguard.

3.Remove backguard, see "Oven Control/Electronic Clock" procedures. (Perform steps 1 – 4.)

4.Remove housing securing rocker switch to the backguard.

5.Label and disconnect wiring and remove switch.

6.Reverse procedures to reassemble.

Indicator Lamps

Indicator lamps include "Hot Surface" and "Element On."

1.Disconnect power before servicing.

2.Remove infinite switch control knobs located on the backguard.

3.Remove backguard, see "Oven Control/Electronic Clock" procedures. (Perform steps 1 – 4.)

4.Remove housing securing indicator lamps to the backguard.

5.Label and disconnect wiring and remove lamps.

6.Reverse procedures to reassemble.

Spark Module

NOTE: Removal of range from installation position is required.

1.Disconnect power before servicing.

2.Remove range from installation position, see "Move and/or Replacing Range" procedure.

3.Remove screws securing bottom rear access panel to chassis.

26

16023417

©2004 Maytag Services

Image 26
Contents Service Customer Service Support Center Important InformationTable of Contents Safety Practices for Servicer ServicingElectrical Requirements Connecting Range to GasUsing the Oven Extension CordBaking, Broiling, and Roasting PrecautionsProduct Safety Devices General Information Service SpecificationsPlacement of the Oven Parts and AccessoriesRange Description Troubleshooting Procedures Maytag Services 16023417 16023417 Maytag Services Component Troubleshooting Problem Possible Cause Correction Oven light does not operate Testing Procedures Illustration/Component Test Procedure H2.5 Control Testing Quick Test Mode for Electronic Range Control This mode will also display the current fault code for Moving and/or Replacing Range Top Surface Valve and Spark SwitchTop Burner Lower Assembly Leveling LegsBroil Element Oven Light ReplacementBake Element Oven SensorDoor Removal Lower Latch Assembly Upper Latch Assembly Oven Door Hinge Rocker SwitchIndicator Lamps RegulatorHi-Limit Thermostat Infinite SwitchConvection Assembly Door PlungerOven Cavity Components Electric Appendix a Installation Instructions Installation Instructions Installation Instructions Installation Instructions Installation Instructions Installation Instructions Installation Instructions Installation Instructions Installation Instructions Installation Instructions Installation Instructions Installation Instructions Installation Instructions Installation Instructions Installation Instructions Installation Instructions Appendix B Use and Care Use and Care Use and Care Use and Care Use and Care Use and Care Use and Care Use and Care Use and Care Use and Care Use and Care Use and Care Use and Care Cleaning Procedures Cleaning Procedures Cleaning Procedures Cleaning Procedures Appendix C LP Conversion Instructions LP Conversion Instructions LP Conversion Instructions LP Conversion Instructions

JDR8895AAB/S/W, JDR8895ACS/W specifications

The Jenn-Air JDR8895ACS/W and JDR8895AAB/S/W are two premium model double oven ranges that exemplify luxury kitchen appliances. These models are designed for those who appreciate culinary craftsmanship, combining elegance with cutting-edge technology. Both offerings provide spacious interiors, allowing chefs to prepare multiple dishes simultaneously, a crucial feature for anyone who enjoys entertaining.

One of the standout features of the Jenn-Air JDR8895 series is its impressive dual-fuel capability, providing the precision of gas cooking with the consistent results of an electric oven. The gas burners offer a variety of power levels, accommodating different cooking techniques, from searing meats to simmering delicate sauces. The oven uses an electric convection system that circulates hot air, ensuring even baking results, which is particularly beneficial for baking pastries or casseroles.

Another defining characteristic is the sleek and modern design, which features a stainless steel exterior that not only enhances the kitchen's aesthetic but also promotes durability and easy cleaning. The intuitive control panel offers smooth, touch-sensitive controls for various settings, making it user-friendly even for novice cooks.

Among the technologies incorporated in the Jenn-Air JDR8895 models is the advanced temperature probe, which allows for precise monitoring of internal temperatures without opening the oven door. This feature is invaluable for achieving perfectly cooked meats and maintaining optimal oven conditions.

In addition to performance features, these ranges are equipped with a self-cleaning mode that simplifies maintenance, allowing users to spend more time cooking rather than cleaning. The built-in Wi-Fi connectivity enables remote monitoring and control of the range through a compatible smartphone app, offering convenience for the modern home chef.

In terms of safety, these models are designed with features such as automatic shut-off and child lock options, providing peace of mind in busy kitchens.

Overall, the Jenn-Air JDR8895ACS/W and JDR8895AAB/S/W range models embody sophistication, functionality, and technology, appealing to anyone looking to elevate their culinary experience. These dual-fuel ranges not only meet high-performance standards but also introduce smart cooking solutions that make every meal an occasion to remember.