Moving and/or Replacing Range, Top Burner

Disassembly Procedures

!WARNING

To avoid risk of electrical shock, personal injury, or death: disconnect electrical and gas supply before servicing.

Moving and/or Replacing Range

1.Turn off electrical power and gas supply to the range.

2.Slide range forward from installation position.

3.Unplug power cord and disconnect gas line from unit.

4.Replace range using Installation Instructions.

NOTE: When placing range into installation position verify anti-tip bracket(s) are engaged.

Leveling Legs

•Some floors are not level.

•For proper baking, your range must be level.

•Leveling legs are located on each corner of the base of the range.

•Place a level horizontally on an oven rack and check front-to-back and side-to-side. Level by turning the legs.

Anti-Tip Bracket

When ever range is moved or replaced for safety reasons this bracket must be engaged.

Anti-Tip Bracket

Leveling Leg

Maintop Removal

1.Disconnect power before servicing.

2.Remove surface burner control knobs by grasping knob and raising knob straight upward.

3.Remove screws securing infinite switch bracket to maintop.

4.Remove screws securing burner assemblies to maintop.

5.Remove screws securing maintop to chassis. Screws are located in the front left and right corners with the upper oven door open.

6.Remove screws securing ground strap to chassis.

7.Raise and remove maintop from unit.

8.Reverse procedures to reassemble.

Top Surface Valve and Spark Switch

1.Remove maintop, see "Maintop Removal" procedure. (Perform steps 1 – 6.)

2.Remove spark switch(es) by pulling upward off valve.

3.Remove wires from spark switch by depressing release arm.

4.Remove bolt(s) securing surface valve(s) to manifold. Located on the bottom of manifold.

5.Reverse procedures to reassemble.

NOTE: Perform gas leak test.

Top Burner Lower Assembly

1.Remove maintop, see "Maintop Removal" procedure. (Perform steps 1 – 6.)

2.Disconnect tubing from lower assembly.

3.Reverse procedures to reassemble.

NOTE: Perform gas leak test.

Top Burner

1.Disconnect power before servicing.

2.Remove screws securing burner to burner lower assembly.

3.Reverse procedures to reassemble.

Side Panel

NOTE: Removal of range from installation position is required.

1.Disconnect power before servicing.

2.Remove range from installation position, see "Move and/or Replacing Range" procedure.

3.Remove maintop, see "Maintop Removal" procedure. (Perform steps 1 – 6.)

4.Remove screws securing right side panel at the top and back of panel.

5.Pull side panel outward away from rear of range, then lift upward on the side panel to release from slotted clips located in front and set aside.

6.Reverse procedures to reassemble.

Manifold and Top Burner

1.Remove maintop, see "Maintop Removal" procedure. (Perform steps 1 – 6.)

NOTE: If replacing manifold only, skip step 2.

2.Loosen and disconnect fittings securing surface burner tubing to burner assembly and manifold.

3.Remove bolt(s) securing surface valve(s) to manifold.

4.Remove bolt securing shut-off valve from manifold.

5.Disconnect tubing from manifold to the regulator.

6.Reverse procedures to reassemble.

NOTE: Perform gas leak test.

16023417

JDR8895AAB/S/W, JDR8895ACS/W specifications

The Jenn-Air JDR8895ACS/W and JDR8895AAB/S/W are two premium model double oven ranges that exemplify luxury kitchen appliances. These models are designed for those who appreciate culinary craftsmanship, combining elegance with cutting-edge technology. Both offerings provide spacious interiors, allowing chefs to prepare multiple dishes simultaneously, a crucial feature for anyone who enjoys entertaining.

One of the standout features of the Jenn-Air JDR8895 series is its impressive dual-fuel capability, providing the precision of gas cooking with the consistent results of an electric oven. The gas burners offer a variety of power levels, accommodating different cooking techniques, from searing meats to simmering delicate sauces. The oven uses an electric convection system that circulates hot air, ensuring even baking results, which is particularly beneficial for baking pastries or casseroles.

Another defining characteristic is the sleek and modern design, which features a stainless steel exterior that not only enhances the kitchen's aesthetic but also promotes durability and easy cleaning. The intuitive control panel offers smooth, touch-sensitive controls for various settings, making it user-friendly even for novice cooks.

Among the technologies incorporated in the Jenn-Air JDR8895 models is the advanced temperature probe, which allows for precise monitoring of internal temperatures without opening the oven door. This feature is invaluable for achieving perfectly cooked meats and maintaining optimal oven conditions.

In addition to performance features, these ranges are equipped with a self-cleaning mode that simplifies maintenance, allowing users to spend more time cooking rather than cleaning. The built-in Wi-Fi connectivity enables remote monitoring and control of the range through a compatible smartphone app, offering convenience for the modern home chef.

In terms of safety, these models are designed with features such as automatic shut-off and child lock options, providing peace of mind in busy kitchens.

Overall, the Jenn-Air JDR8895ACS/W and JDR8895AAB/S/W range models embody sophistication, functionality, and technology, appealing to anyone looking to elevate their culinary experience. These dual-fuel ranges not only meet high-performance standards but also introduce smart cooking solutions that make every meal an occasion to remember.