Bake Element, Broil Element, Oven Sensor

Disassembly Procedures

!WARNING

To avoid risk of electrical shock, personal injury, or death: disconnect electrical and gas supply before servicing.

Bake Element

1.Disconnect power before servicing.

2.Remove oven door for easier accessibility, see "Oven Door(s)-Door Removal" procedure.

3.Remove screws securing bake element to back of oven cavity.

4.Gently pull element through cavity wall until terminals can be accessed.

5.Label and disconnect wiring and remove element.

6.Reverse procedures to reassemble.

Broil Element

1.Disconnect power before servicing.

2.Remove oven door for easier accessibility, see "Oven Door(s)-Door Removal" procedure.

3.Remove broil element support brackets.

4.Remove screws securing broil element to back of oven cavity.

5.Gently pull element through cavity wall until terminals can be accessed.

6.Label and disconnect wiring and remove element.

7.Reverse procedures to reassemble.

Oven Sensor

The oven sensor is located inside oven cavity, attached to the upper left rear wall of the cavity.

1.Disconnect power before servicing.

2.Open oven door and remove screws securing sensor to oven cavity.

NOTE: Gently pull wiring through cavity wall.

3.Disconnect sensor at connector block and remove.

4.Reverse procedures to reassemble.

NOTE: Verify connect is pushed through the insulation.

Oven Light Replacement

The oven light used is a 120 volt, 20 watt Halogen bulb. The light automatically illuminates when the door is opened, or may be manually activated when the door is closed via the light pad. The light will not operate during a clean cycle. The oven light automatically illuminates one minute before the end of a clock-controlled cooking operation.

1.Disconnect power before servicing.

2.Open oven door and locate oven light.

3.Grasp lens cover and pull outward on one side to gain access to bulb.

4.Carefully remove old bulb, by lifting bulb straight out of ceramic base.

NOTE: To avoid damaging the new bulb and decreasing life of the bulb, do not touch new bulb with bare hands or fingers.

Hold with a cloth or paper towel.

5. Reverse procedures to reassemble.

Bulb

Socket

Lens

Bulb specifications:

G5.3 Type Halogen Bi-Pin 120 volt, 20 watt

Oven Door(s)

Do not place excessive weight on an open oven door or stand on an opened door as, in some cases, it could cause the range to tip over, breakage of the door, or serious injury.

Both the upper and lower oven doors are removable.

NOTE: DO NOT LIFT OVEN DOOR USING HANDLE. Damage to the oven door and personal injury may occur.

Electronic Clock

1.Disconnect power before servicing.

2.Remove vent deflector by removing screws located on the underside of the control panel.

3.Remove screws securing backguard panel to backguard housing. (Screws are located on the bottom and back side of control panel.)

4.Lift control panel up, tilt forward, and lay panel on a protected surface of the maintop for servicing.

5.Remove screw securing mounting plate to backguard.

6.Disconnect wiring and remove control.

7.Reverse procedures to reassemble.

16023417

JDR8895AAB/S/W, JDR8895ACS/W specifications

The Jenn-Air JDR8895ACS/W and JDR8895AAB/S/W are two premium model double oven ranges that exemplify luxury kitchen appliances. These models are designed for those who appreciate culinary craftsmanship, combining elegance with cutting-edge technology. Both offerings provide spacious interiors, allowing chefs to prepare multiple dishes simultaneously, a crucial feature for anyone who enjoys entertaining.

One of the standout features of the Jenn-Air JDR8895 series is its impressive dual-fuel capability, providing the precision of gas cooking with the consistent results of an electric oven. The gas burners offer a variety of power levels, accommodating different cooking techniques, from searing meats to simmering delicate sauces. The oven uses an electric convection system that circulates hot air, ensuring even baking results, which is particularly beneficial for baking pastries or casseroles.

Another defining characteristic is the sleek and modern design, which features a stainless steel exterior that not only enhances the kitchen's aesthetic but also promotes durability and easy cleaning. The intuitive control panel offers smooth, touch-sensitive controls for various settings, making it user-friendly even for novice cooks.

Among the technologies incorporated in the Jenn-Air JDR8895 models is the advanced temperature probe, which allows for precise monitoring of internal temperatures without opening the oven door. This feature is invaluable for achieving perfectly cooked meats and maintaining optimal oven conditions.

In addition to performance features, these ranges are equipped with a self-cleaning mode that simplifies maintenance, allowing users to spend more time cooking rather than cleaning. The built-in Wi-Fi connectivity enables remote monitoring and control of the range through a compatible smartphone app, offering convenience for the modern home chef.

In terms of safety, these models are designed with features such as automatic shut-off and child lock options, providing peace of mind in busy kitchens.

Overall, the Jenn-Air JDR8895ACS/W and JDR8895AAB/S/W range models embody sophistication, functionality, and technology, appealing to anyone looking to elevate their culinary experience. These dual-fuel ranges not only meet high-performance standards but also introduce smart cooking solutions that make every meal an occasion to remember.