Jenn-Air W10418362B installation instructions

Page 13

WARNING

Electrical Shock Hazard

Electrically ground dishwasher.

Connect ground wire to green ground connector in terminal box.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Remove the green grounding screw and place through the ring terminal of the green ground wire. Reattach and tighten the green screw.

NOTE: Do not pre-twist stranded wire. Twist on wire connector. Gently tug on wires to be sure both are secured.

Connect wires black to black and white to white, using UL Listed/CSA Approved twist-on wire connectors.

If needed, see website for animated representation of this step. Visit www.jenn-air.com/electricalunder FAQ tab.

Tighten strain relief screws to secure cord.

Place wires inside terminal box. Insert tabs on left side of cover. Make sure wires are tucked inside box. Close cover ensuring wires are not pinched. Use ¹⁄₄" nut driver or Torx® T20® screwdriver and previously removed screw to secure cover.

NOTE: Do not plug into outlet until instructed to do so.

13

Image 13

Contents Installation Instructions Undercounter Dishwasher Table of Contents Addition, for first-time installations All InstallationsTools and Parts Call 1-800-688-1100 to order Location RequirementsPage If connecting dishwasher with direct wiring If connecting dishwasher with a power supply cordDrain Requirements Water Supply RequirementsPrepare Cabinet Opening-New Utilities Prepare Cabinet Opening-Existing UtilitiesPrepare and Route Water Line Option B, Direct WireInstall Drain Hose Option B, No waste disposer no air gap Option A, Waste disposer no air gapOption C, Waste disposer with air gap Prepare Dishwasher Install Moisture Barrier Under a wood countertopOption D, No waste disposer with air gap Option A, Remove Access Panel Plastic Make Power Supply Cord ConnectionOption B, Remove Access Panel Metal Panel Page Determine Cabinet Opening Choose Attachment Option Install Door Handle on some modelsOption A, Countertop attachment Option B, Dishwasher side attachment Prepare Water Supply LineMove Dishwasher Close to Cabinet Opening Page Connect to Drain Connect to Water SupplyMake Direct Wire Electrical Connection Secure Dishwasher in Cabinet Opening Bottom Sound Pad Installation On some models Complete Installation Check Operation Reconnect PowerIf Dishwasher Does Not Operate Additional TipsIl faut Table DES MatièresOutillage et pièces Exigences DinstallationExigences demplacement Page Spécifications de l’alimentation en eau Exigences d’évacuationSpécifications électriques Pour le raccordement direct du lave-vaisselleDencastrement du placard Moyens de Préparation de louvertureRaccordement pré-existants Option A, cordon d’alimentationOption B, raccordement direct Préparation et acheminement de la Canalisation d’eauInstallation du tuyau d’évacuation Option B pas de broyeur à déchets sans brise-siphon Option a broyeur à déchets sans brise-siphonOption C broyeur à déchets avec brise-siphon Option D pas de broyeur à déchets avec brise-siphon Préparation du lave-vaisselleOption a Retrait du panneau daccès Panneau en plastique Raccordement du cordon dalimentationOption B Retrait du panneau daccès Panneau métallique Avertissement Évaluation de l’ouverture dencastrement du placard Choix de l’option de fixation Installation de la poignée de porte Sur certains modèlesOption A, Fixation au plan de travail Option B, Fixation au côté du lave-vaisselle Préparation de la canalisation Dalimentation en eauAvertissement Remarques Raccordement au circuit dévacuation Raccordement à l’alimentation en eauRaccordement électrique direct Page Remarques Option B Installation du panneau daccès Panneau métallique Achever linstallationRétablir la source de courant électrique Si le lave-vaisselle ne fonctionne pas Contrôle du fonctionnementConseils supplémentaires