Avanti BD6000 instruction manual ?Warning?, ? Electrical Connection, ? Extension Cord

Page 10

under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and or grounding should be directed toward a certified electrician or an authorized Avanti Products service center.

?After plugging the appliance into a wall outlet, allow the unit to cool down for 2-3 hours before placing any contents in the Beer Dispenser compartment.

?Electrical Connection

?Warning?

Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged, have it replaced by an authorized Avanti Products service center.

This unit should be properly grounded for your safety. The power cord of this unit is equipped with a three-prong plug which mates with standard three prong wall outlets to minimize the possibility of electrical shock .

Do not under any circumstances cut or remove the third ground prong from the power cord supplied. For personal safety, this appliance must be properly grounded.

This unit requires a standard 115/120 Volt AC ~/60Hz electrical outlet with three-prong ground. Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded. When a standard 2-prong wall outlet is encountered, it is your responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

The cord should be secured behind the unit and not left exposed or dangling to prevent accidental injury.

The unit should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating label on the appliance. This provides the best performance and also prevent overloading house wiring circuits that could cause a fire hazard from overheated. Never unplug the unit by pulling the power cord. Always grip the plug firmly and pull straight out from the receptacle. Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end. When moving the unit, be careful not to damage the power cord.

?Extension Cord

Because of potential safety hazards under certain conditions, it is strongly recommended that you do not use an extension cord with this unit. However, if you must use an extension cord it is absolutely necessary that it be a UL/CUL-Listed, 3-wire grounding type appliance extension cord having a grounding type plug and outlet and that the electrical rating of the cord be 115 volts and at least 10 amperes.

?Reversing the Door Swing of Your Appliance

This appliance has the capability of the door opening from either the left or right side. The unit is delivered to you with the door opening from the left side. Should you desire to reverse the opening direction, please call service for reversal instructions.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Model Number / No. de Modelo La sección en espa ñol empieza en la páginaBeer Dispenser Safety Your safety and the safety of others are very importantImportant Safeguides Registration Information Page Read this guide carefully Avanti Customer ServiceHelp US Help YOU Write down the model and serial numbersTable of Contents Arts and Features ? Before Using Your Beer Dispenser Important Safety InstructionsInstallation Instructions ? Installation of Your Beer Dispenser? Extension Cord ?Warning?? Electrical Connection ? Reversing the Door Swing of Your ApplianceBeer Keg Installation Sketch ? Installation Instructions for Beer DispenserCO2 GAS can be Dangerous Installation of CO2 Cylinder Castors with Lock Installation SketchInstallation of CO2 Cylinder Holder Installation of CO2 RegulatorInstallation of Protective Metal Plate Installation Of t he Keg CouplerInstallation of the CO2 Air Line Hose Installation of the Beer KegConnecting the Beer Tower to Coupler Installation of CO2 Air Line Hose t o Re gulatorInstallation Of The Beer Tower How to Tap a Keg of Beer? Plastic Faucet Lever Adjusting the CO2 Regulator? Spanner Faucet Wrench ? Dispensing BeerCare and Maintenance Operating Your Beer Dispenser? Vacation Time Draught Beer Trouble GuideCloudy Beer ? Moving Your Beer DispenserFlat Beer Loose Foam OFF-TASTE BeerSour Beer Wild BeerPage Tail END Beer Troubleshooting Guide Problems with Your Beer DISPENSER?Service for Your Beer Dispenser Avanti Products Customer ServicesLimited Second Through Fifth Year Warranty What is Covered Limited ONE-YEAR WarrantyWhat is not Covered Wiring Diagram Precaución Instrucciones EN EspañolInstrucciones Para LA Instalacion ? Conexión eléctrica AdvertenciaInstalación del Regulador de CO2 GAS Carbonico Instalación del Soporte del Cilindro de CO2 GAS CarbonicoInstalación del Cilindro de CO2 GAS Carbonico Instalación de la torre al acopladorComo servir la cerveza desde la Torre Instalación del adaptador del barrilInstalación de la manguera de aire CO2 GAS Carbonico Como abrir la válvula principal del CO2 GAS Carbonico? Descongelamiento Automático Usando SU Dispensador DE Cerveza? Control de temperatura Cuidado Y Mantenimiento? Para mover su dispensador ? Limpieza de su Dispensador de Cerveza? Si usted sale de vacaciones Cerveza TurbiaCerveza Acida Cerveza SIN CuerpoPerdida DE Espuma Cerveza SIN SaborCerveza Rebelde Problemas CON SU Dispensador DE Cerveza Guia Para Solucionar Problemas

BD6000 specifications

The Avanti BD6000 is a state-of-the-art electric bike designed for enthusiasts who seek adventure without compromising on comfort and performance. This model stands out in the crowded e-bike market due to its unique blend of cutting-edge technology, stylish design, and practical features.

One of the most impressive aspects of the Avanti BD6000 is its powerful electric motor. Equipped with a high-torque 750W motor, the BD6000 offers a swift and responsive ride. This motor enables the bike to tackle steep hills and challenging terrains with ease, ensuring that riders can conquer any route they choose. The bike's top speed can reach up to 28 mph, which makes it a great option for both commuting and recreational outings.

Another notable feature is the advanced battery system. The Avanti BD6000 incorporates a removable lithium-ion battery with a capacity of 48V and 14Ah, providing a remarkable range of up to 50 miles on a single charge. This extended range is particularly beneficial for longer rides, allowing users to travel further without worrying about running out of power. The battery also features smart charging technology, ensuring quick charging times and longevity.

The bike's frame is designed with both durability and aesthetics in mind. Constructed from lightweight aluminum alloy, the BD6000 is robust yet easy to maneuver. The design incorporates a sleek, modern appearance that appeals to a variety of riders, whether they're high-performance cyclists or casual weekend riders.

Furthermore, the Avanti BD6000 comes equipped with top-of-the-line components. It features a Shimano gear system that allows for smooth and precise shifting, enhancing the overall riding experience. The bike is equipped with hydraulic disc brakes for reliable stopping power in a variety of conditions, ensuring safety at all times.

For comfort, the Avanti BD6000 includes an adjustable seat and ergonomic handlebars, allowing riders to customize their posture for a more enjoyable ride. Additionally, the bike is fitted with puncture-resistant tires that provide excellent traction and stability on various surfaces.

In summary, the Avanti BD6000 represents an innovative approach to electric biking, merging performance, range, and comfort in a stylish package. With its robust motor, long-lasting battery, and high-quality components, this e-bike is designed to meet the needs of diverse riders, making it an outstanding choice for an electrically-assisted cycling experience. Whether navigating city streets or exploring off-road paths, the Avanti BD6000 promises an exhilarating and reliable ride.
Top Page Image Contents