Avanti BD6000 instruction manual Important Safeguides

Page 3

IMPORTANT SAFEGUIDES

Before the appliance is used, it must be properly positioned and installed as described in this manual,so read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the appliance, follow basic precaution, including the following:

?Plug into a grounded 3 -prong outlet, do not remove grounding prong, do not use a n adapter, and do not use an extension cord.

?Replace all panels before operating .

?It is recommended that a separate circuit, serving only your appliance be provided. Use receptacles that cannot be turned off by a switch or pull chain.

?Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or explosion. And do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.

?Before proceeding with cleaning and maintenance operations, make sure the power line of the unit is disconnected.

?Do not connect or disconnect the electric plug when your hands are wet.

?Unplug the appliance or disconnect power before cleaning or servicing. Failure to do so can result in electrical shock or death.

?Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in this manual. All other servicing should be referred to a qualified technician.

FOLLOW WARNING CALL OUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL

?Use two or more people to move and install appliance . Failure to do so can result in back or other injury.

?To ensure proper ventilation for your appliance, the front of the unit must be completely unobstructed. Choose a well-ventilated area with temperatures above 60°F (16°C) and below 90°F (32°C). This unit must be installed in an area protected from the element, such as wind, rain, water spray or drips.

?The appliance should not be located next to ovens, g rills or other sources of high heat.

?The appliance must be installed with all electrical, water and drain connections in accordance with state and local codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded in accordance with the Na tional Electrical Code and local codes and ordinances is required.

?Do not kink or pinch the power supply cord of appliance.

?The fuse (or circuit breaker) size should be 15 amperes.

?It is important for the appliance to be leveled in order to work properly. You may need to make several adjustments to level it.

?All installation must be in accordance with local plumbing code requirements.

?Make certain that the pipes are not pinched or kinked or damaged during installations .

?Check for leaks after connection.

?Never allow children to operate, play with or crawl inside the appliance.

?If you use the drainage container , you must set the drain select switch to OFF or the water can overflow from the drainage container

?Although the unit has been tested at the factory, due to long-term transit and storage, the first batch of cubes must be discarded.

?Do not use solvent-based cleaning agents of abrasives on the interior. These cleaners may damage or discolor the interior.

?Do not use this apparatus for other than its intended purpose.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents La sección en espa ñol empieza en la página Model Number / No. de ModeloYour safety and the safety of others are very important Beer Dispenser SafetyImportant Safeguides Registration Information Page Write down the model and serial numbers Avanti Customer ServiceHelp US Help YOU Read this guide carefullyTable of Contents Arts and Features ? Installation of Your Beer Dispenser Important Safety InstructionsInstallation Instructions ? Before Using Your Beer Dispenser? Reversing the Door Swing of Your Appliance ?Warning?? Electrical Connection ? Extension Cord? Installation Instructions for Beer Dispenser Beer Keg Installation SketchCO2 GAS can be Dangerous Installation of CO2 Regulator Castors with Lock Installation SketchInstallation of CO2 Cylinder Holder Installation of CO2 CylinderInstallation of the Beer Keg Installation Of t he Keg CouplerInstallation of the CO2 Air Line Hose Installation of Protective Metal PlateHow to Tap a Keg of Beer Installation of CO2 Air Line Hose t o Re gulatorInstallation Of The Beer Tower Connecting the Beer Tower to Coupler? Dispensing Beer Adjusting the CO2 Regulator? Spanner Faucet Wrench ? Plastic Faucet LeverOperating Your Beer Dispenser Care and Maintenance? Moving Your Beer Dispenser Draught Beer Trouble GuideCloudy Beer ? Vacation TimeFlat Beer OFF-TASTE Beer Loose FoamWild Beer Sour BeerPage Tail END Beer Problems with Your Beer DISPENSER? Troubleshooting GuideAvanti Products Customer Services Service for Your Beer DispenserWhat is Covered Limited ONE-YEAR Warranty Limited Second Through Fifth Year WarrantyWhat is not Covered Wiring Diagram Instrucciones EN Español PrecauciónInstrucciones Para LA Instalacion Advertencia ? Conexión eléctricaInstalación de la torre al acoplador Instalación del Soporte del Cilindro de CO2 GAS CarbonicoInstalación del Cilindro de CO2 GAS Carbonico Instalación del Regulador de CO2 GAS CarbonicoComo abrir la válvula principal del CO2 GAS Carbonico Instalación del adaptador del barrilInstalación de la manguera de aire CO2 GAS Carbonico Como servir la cerveza desde la TorreCuidado Y Mantenimiento Usando SU Dispensador DE Cerveza? Control de temperatura ? Descongelamiento AutomáticoCerveza Turbia ? Limpieza de su Dispensador de Cerveza? Si usted sale de vacaciones ? Para mover su dispensadorCerveza SIN Cuerpo Cerveza AcidaCerveza SIN Sabor Perdida DE EspumaCerveza Rebelde Guia Para Solucionar Problemas Problemas CON SU Dispensador DE Cerveza

BD6000 specifications

The Avanti BD6000 is a state-of-the-art electric bike designed for enthusiasts who seek adventure without compromising on comfort and performance. This model stands out in the crowded e-bike market due to its unique blend of cutting-edge technology, stylish design, and practical features.

One of the most impressive aspects of the Avanti BD6000 is its powerful electric motor. Equipped with a high-torque 750W motor, the BD6000 offers a swift and responsive ride. This motor enables the bike to tackle steep hills and challenging terrains with ease, ensuring that riders can conquer any route they choose. The bike's top speed can reach up to 28 mph, which makes it a great option for both commuting and recreational outings.

Another notable feature is the advanced battery system. The Avanti BD6000 incorporates a removable lithium-ion battery with a capacity of 48V and 14Ah, providing a remarkable range of up to 50 miles on a single charge. This extended range is particularly beneficial for longer rides, allowing users to travel further without worrying about running out of power. The battery also features smart charging technology, ensuring quick charging times and longevity.

The bike's frame is designed with both durability and aesthetics in mind. Constructed from lightweight aluminum alloy, the BD6000 is robust yet easy to maneuver. The design incorporates a sleek, modern appearance that appeals to a variety of riders, whether they're high-performance cyclists or casual weekend riders.

Furthermore, the Avanti BD6000 comes equipped with top-of-the-line components. It features a Shimano gear system that allows for smooth and precise shifting, enhancing the overall riding experience. The bike is equipped with hydraulic disc brakes for reliable stopping power in a variety of conditions, ensuring safety at all times.

For comfort, the Avanti BD6000 includes an adjustable seat and ergonomic handlebars, allowing riders to customize their posture for a more enjoyable ride. Additionally, the bike is fitted with puncture-resistant tires that provide excellent traction and stability on various surfaces.

In summary, the Avanti BD6000 represents an innovative approach to electric biking, merging performance, range, and comfort in a stylish package. With its robust motor, long-lasting battery, and high-quality components, this e-bike is designed to meet the needs of diverse riders, making it an outstanding choice for an electrically-assisted cycling experience. Whether navigating city streets or exploring off-road paths, the Avanti BD6000 promises an exhilarating and reliable ride.
Top Page Image Contents