Bloomfield 2280, 2288EX, 2282, 2286EX owner manual USER’S Guide, Burn Hazard

Page 9

USER’S GUIDE

1.Remove the Brew Chamber from under the spray head. Place one (1) genuine Bloomfield paper filter into the Brew Chamber. Add your choice of pre-measured ground coffee. Shake the Brew Chamber gently to level the coffee.

Slide the Brew Chamber back into place.

PAPER

FILTER

BREW

CHAMBER

2.Place an empty Airpot or Thermal Server under the Brew Chamber.

3.To begin the brew cycle, press BREW key. Hot water will start spraying over the coffee, and brewed coffee will start filling the decanter. When the coffee stops flowing from the Brew Chamber, the fresh coffee is ready to serve.

NOTE: Brewing will not begin until the Precise Temperature for Brewing™ has been reached. (See page 6)

4.After all dripping has stopped, remove the Brew Chamber from the brewer. Discard the used paper filter and product.

5. The brewer is now be ready to begin another brewing cycle.

OPERATION

WARNING: Burn Hazard.

This appliance dispenses very hot liquid. Serious bodily injury from scalding can occur from contact with dispensed liquids.

CAUTION:

Burn Hazard

To avoid splashing or overflowing hot liquids, ALWAYS use an empty airpot or thermal server before starting the brew cycle. Failure to comply can cause serious burns.

CAUTION:

Burn Hazard

After a brew cycle, brew basket contents are HOT. Remove the brew basket and dispose of used filter and grounds with care. Failure to comply can cause serious burns.

CAUTION:

Burn Hazard

Exposed surfaces of the appliance, as well as brew basket and server may be HOT to the touch, and can cause serious burns.

7

Image 9
Contents Airpot Thermal Brewers Shipping Damage Claims Procedure Warranty StatementSpecifications Table of ContentsFeatures & Operating Controls Electrical Damage Precautions and General InformationPLUMBER’S Installation Instructions Installation InstructionsEquipment Hazard Leveling the UnitELECTRICIAN’S Installation Instructions Shock HazardAgency Approval Information Operation Operating InstructionsBurn Hazard USER’S GuidePrecautions Cleaning InstructionsElectric Shock Hazard FrequencyTimer Servicing Operational AdjustmentsServicing Instructions Electrical OperationSee page 11 for Component Names / Numbers Maxlx Electrical Component See page 13 for Component NAMES/NUMBERS Servicing Instructions PlumbingDescription Part N0 Used on Burn Hazard Servicing Instructions DE-LIMING Heater TankTemperature has Recovered Servicing Instructions Diagnostics & TroubleshootingLOW Water Level OverheatExploded View Airpot Models Parts List Airpot Models Exploded View Thermal Server Models Parts List Thermal Server Models Wiring Diagram 120 Volt Wiring Diagram 240 Volt Export Models Bloomfield Industries, Inc Division of Carrier Refrigeration