AEG 4270 I manual Start the wash programme, Changing/Interrupting/Cancelling, Wash Programme

Page 23

Operating instructions

Start the wash programme

0 1. Check that the dishes and cutlery are loaded into the dishwasher in such a manner that the spray arms are free to rotate.

2.Open the tap fully.

3.Shut the door.

4.Press the ON/OFF button. The ON/OFF button indicator illuminates.

5.Press the programme button for the desired programme (see "Pro- gramme Table"). The programme indicator illuminates. The selected programme begins after around 6 seconds. During the wash pro- gramme the current programme step is indicated on the programme progress display.

3

If END or DRYING on the programme progress display flash after the

 

start of the programme, please read the "What to do, if..." section.

 

Changing/Interrupting/Cancelling

 

the Wash Programme

3

Only change or interrupt a wash programme in progress if it is abso-

 

lutely necessary to do so. When the appliance is closed again, the air

 

that has entered is heated and expands significantly. As result water

 

may penetrate into the base of the appliance and trigger the leak pre-

 

vention system.

 

Changing the wash programme

3

If you want to change the wash programme within 6 seconds of mak-

 

ing a programme selection, briefly press the button for the new wash

 

programme.

 

If you want to change the wash programme at a later point in time, use

 

the following procedure:

0 1. Press the button for the new wash programme and hold it pressed. The indicators for both programmes now flash.

2.After a few seconds only the indicator for the new programme flashes. Release the programme button, the new programme is now running.

23

Image 23
Contents Ökofavorit 4270 Use of the appliance are marked with a clover leaf Tips on using the applianceDear customer Please read these user instructions carefullyContents Installation and Connection Instructions Child Safety Safety instructionsInstallation, connection and initial use Intended use General safetyDisposal of old appliances DisposalEconomical and Ecological Dishwashing Disposing of the Packaging MaterialAppliance Features and Control Panel Control panel Prior to using for the first timeIndicators have the following meanings Hardness range of the water in your area Adjust the water softenerSalt Turning it anticlockwise Filling with Special Salt for the Water SoftenerFill with special salt Use special salt Open the door, remove the lower RackFill with rinse aid Filling with Rinse AidThat you glasses are clear Would damage the applianceAdjusting Rinse Aid Dosing Not be washed in the dishwasher Daily UseLoading cutlery and dishes Long, pointed items of cutlery Loading CutleryTo ease the loading of large items Loading Pans, Frying Pans Large PlatesLoad large and heavily soiled dishes in the lower rack Folded over to the leftRack can be folded across one another Folded across one anotherAcross one another Two rear plate inserts in the lowerLoading Cups, Glasses and Coffee Services Fill with detergent Filling with DetergentUse of 3 in 1/ Combi Detergent Tablets General AdviceSpecial Advice Bio Wash Programmes and Concentrated Detergents Type of Soiling Selecting the Wash Programme Programme TableChanging the wash programme Changing/Interrupting/CancellingStart the wash programme Wash ProgrammeDishwasher Cancelling the wash programmeDishwasher is switched on again Load Sensing Sensor LogicEmptying the Dishwasher Care and CleaningSwitching Off the Dishwasher Cleaning the Filter What to do, when Error messages are displayedDishes are wet and dull Problems occur during use of the dishwasherWash results are not satisfactory Dishes are still dirtyThere are dried water drops on the glasses and dishes Technical DataLower rinse aid dosing Upper basket Lower basket with cutlery basket Sample loading arrangementsInstalling the Dishwasher Installation and Connection InstructionsFree-Standing Appliances Dishwashers That Can Be IntegratedBuilt-In Dishwasher Fitted with a décor panel to match Plinth on free-standing appliances is not adjustableWork surface must be re-mounted Free-standing appliances can beConnect the inlet hose Connecting the DishwasherWater Connection Permitted water pressurePlease take care when installing the water inlet hose Water inlet hose with safety valveSink outlet connection Water drainDrain hose Extension hosesAppliance is automatically pumped out Leak Prevention SystemElectrical connection Connections Service Departments USA Otros puntos de Postventa en el extranjero Further after-sales service agencies overseasAutres agences étrangères assurant le service après-vente Weitere Kundendienststellen im AuslandPage Service AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG