AEG 4270 I Work surface must be re-mounted, Plinth on free-standing appliances is not adjustable

Installation and Connection Instructions

If the dishwasher is installed underneath a kitchen work surface, the original work surface of the dishwasher is to be removed as follows:

0 1. Unscrew the screws from the posi- tioning plates on the back (1).

2.Slide the appliance's work surface

approx. 1 cm to the rear (2).

3. Lift the work surface at the front (3) and remove.

1	If the dishwasher is later used as a free-standing appliance, the original
	work surface must be re-mounted.
3 The plinth on free-standing appliances is not adjustable.
	• Free-standing appliances can be
	fitted with a décor panel to match
	the facings of other kitchen equip-
	ment. The décor panels must be
	obtained from the kitchen manu-
	facturer. A décor frame is necessary
	for installation, and can be
	obtained as an accessory from the
	dealer if not included in the scope
	of delivery.

• Decor panel dimensions:

– Height 590 mm

–Width 581 mm

–Clamp thickness: max. 4 mm

•To ensure that thin decor panels do not flex or distort, attach them to the door of the appliance using double sided adhesive tape.

33