Operating instructions
What to do, when ...
Try to rectify minor faults on the dishwasher with the aid of the instructions given here. If you call in customer service to resolve one of the malfunctions listed here, or rectify an error made in the operation of the appliance, the customer service engineer’s visit is not free of charge, even during the period of guarantee.
...Error messages are displayed.
•If the END or DRYING indicator on the programme progress display is flashing, you can probably rectify the fault yourself.
After rectifying an END or DRYING fault, press the button for the wash programme that has been started. The wash programme contin- ues. If the fault is displayed again, contact customer service.
•If indicators for other programme steps on the programme progress display are flashing, please contact customer service and state the fault indicated.
Malfunction | Possible Cause | Remedy | |
| Tap is blocked or furred with | Clean tap. | |
|
| ||
END on the pro- | The filter (where present) in |
| |
gramme progress dis- |
| ||
the threaded hose fitting at | Clean the filter in the | ||
play is flashing: | |||
the water inlet valve is | threaded hose fitting. | ||
no water is running | |||
blocked. |
| ||
into the dishwasher. |
| ||
|
| ||
| The water inlet hose is not | Check hose installation. | |
| correctly laid. | ||
|
| ||
DRYING on the pro- | The siphon is blocked. | Clean siphon. | |
|
| ||
gramme progress dis- | The water drain hose is not | Check hose installation. | |
play is flashing. | |||
correctly laid. | |||
|
| ||
END and DRYING on |
|
| |
the programme | The leak prevention system | Close the tap and contact | |
progress display are | |||
has been triggered. | customer service. | ||
flashing simultane- | |||
|
| ||
ously. |
|
| |
|
|
|
27