AEG 4270 I Dishwashers That Can Be Integrated, Built-In Dishwasher, Free-Standing Appliances

Installation and Connection Instructions

• Depending on type, the dishwasher is to be installed as follows:

Dishwashers That Can Be Integrated

(see installation template supplied)

3		The door of the appliance can be fitted with a wooden furniture door
		with the following dimensions:
	Width 587mm		591 – 594 mm
	Thickness:		16 – 24 mm
	Height:		dependent on	– Recess height
	(variable)			– Plinth height
				– The adjustment so that the unit matches the height of
				the adjoining units
				The exact height of the adjoining units must be meas-
				ured at the place of installation.
	Weight:		max. 8 kg
1		If the furniture door is longer than 600 mm, the door of the appliance
		cannot be opened completely (the facing panel bumps against the
		plinth).
		If this is the case, the plinth must be cut out (see installation template)
		or the brace adapter for the extra long door BLT 60 must be used.
		You can obtain this with the E No. 911 239 008.
		Built-In Dishwasher
		(see enclosed installation instructions)
		Free-Standing Appliances
		can be set up as stand-alone without additional installation.
1		If the dishwasher is set up next to a gas or coal cooker, a heat-
		insulating, non-flammable plate must be mounted between the

dishwasher and the cooker, flush to the top edge of the work surface (depth 57.5 cm). The plate should have aluminium foil on the side fac- ing the cooker.

32