AEG 40850 manual Cleaning the spray arm jets, Upper basket spray arm

Page 26

5.Remove the flat filter (3) from the base of the washing compartment and clean both surfaces thoroughly.

6.Re-insert the flat filter.

7.Place the fine filter in the micro-fil- ter and fit the two together.

8.Insert the filter system in place and lock it by turning the handle clock- wise as far as it will go. Ensure that the flat filter does not protrude above the base of the washing com- partment.

1

3

Under no circumstances may the dishwasher be used without its filters.

Cleaning the spray arm jets

Regularly check the jets in the spray arms for blockages. When cleaning is necessary, remove spray arm from the fixture and clean jets with a pointed object (wire or needle). Then rinse out the spray arm using a strong jet of water.

Do not damage the jet opening.

Upper basket spray arm

1.To remove upper basket spray arm, tilt it down hard.

2.Clean spray arms jets.

26

Image 26 Contents
Favorit Following symbols are used in the text Dear CustomerContents Child Safety SafetyPrior to using for the first time Follow the Instructions for installation and connectionGeneral Safety Diagram of Appliance Control PanelFunction button Set the water softener Setting manually Prior to Using for the First TimeSetting the Water Softener Setting electronically 10LOnly when using the dishwasher for the first time Adding dishwasher SaltFilling Up with Rinse Aid Setting the Amount of Rinse Aid Required Activating/Deactivating the Rinse Aid dispenser Daily use Loading cutlery and dishesLoading cutlery Pots, Pans, Large PlatesCups, Glasses, Coffee Service Type Raising / Lowering the upper bas- ket Adjusting the Height of the Upper BasketType Raising/Lowering the Upper Bas- ket Adding Detergent Detergent tablets Using 3in1 detergentsConcentrated detergents If you want to use 4in1 products If you want to use 3in1 productsIf you do not want to use 3in1 products any more Selecting the dishwashing cycle Cycle Table Suitable TypeSelecting a programme Starting a Dishwashing Cycle Interrupting or Cancelling a dishwashing cycleCancelling the dishwashing cycle To change the time delay Setting the Delay TimerSwitching Off the dishwasher Cancelling the time delayRemoving the Dishes Care and cleaningCleaning the filters Cleaning the spray arm jets Upper basket spray armBottom spray arm What to do if Remedying small malfunctionsFault code Å 30 is dis Dishes do not dry and are not shining If the Dishwashing Results are not SatisfactoryDishes are still dirty There are dried water drops on the glasses and dishesOld appliance DisposalPackaging material Technical data Example loading arrangements Full load Half loadPage Installation and connection instructions Safety Information for the InstallationInstalling the Dishwasher Free-standing appliances Connecting the inlet hose Connecting the dishwasherConnecting to the water supply Permitted water pressureExtension hoses Water drainageDrain hose Sink outlet connectionChanging a fuse Anti-flood systemElectrical Connection Green and Yellow Earth BlueNeutral BrownLiveConnecting systems Warranty conditions Great Britain0870 5 929 Customer Care For general enquiries concerningAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG
Related manuals
Manual 32 pages 54.5 Kb