AEG 40850 manual Connecting systems

Page 41

The wire coloured green and yellow must be connected to the termi- nal marked with the letter “E“ or by the earth symbol E or coloured green and yellow.

The wire coloured blue must be connected to the terminal “N“ or col- oured black.

The wire coloured brown must be connected to the terminal marked “L“ or coloured red.

Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath.

1WARNING! A cut off plug inserted into a 13 amp socket is a seri- ous safety (shock) hazard. Ensure that, if it is necessary to cut off the plug, it is disposed of safely and not retained.

Connecting systems

The water inlet hose, drain hose and the mains cable must all be con- nected to the side of the dishwasher as there is no space for them be- hind the appliance.

2 connection pieces 45° or straight, outer ø 19 mm, length 30 mm

double valve

water- drainage

water inlet

water-

mains

water-

mains socket

mains cable

inlet

cable

drainage

 

 

41

Image 41 Contents
Favorit Dear Customer Following symbols are used in the textContents Prior to using for the first time SafetyChild Safety Follow the Instructions for installation and connectionGeneral Safety Control Panel Diagram of ApplianceFunction button Set the water softener Setting manually Prior to Using for the First TimeSetting the Water Softener 10L Setting electronicallyAdding dishwasher Salt Only when using the dishwasher for the first timeFilling Up with Rinse Aid Setting the Amount of Rinse Aid Required Activating/Deactivating the Rinse Aid dispenser Loading cutlery and dishes Daily usePots, Pans, Large Plates Loading cutleryCups, Glasses, Coffee Service Type Raising / Lowering the upper bas- ket Adjusting the Height of the Upper BasketType Raising/Lowering the Upper Bas- ket Adding Detergent Detergent tablets Using 3in1 detergentsConcentrated detergents If you want to use 4in1 products If you want to use 3in1 productsIf you do not want to use 3in1 products any more Suitable Type Selecting the dishwashing cycle Cycle TableSelecting a programme Starting a Dishwashing Cycle Interrupting or Cancelling a dishwashing cycleCancelling the dishwashing cycle Switching Off the dishwasher Setting the Delay TimerTo change the time delay Cancelling the time delayRemoving the Dishes Care and cleaningCleaning the filters Upper basket spray arm Cleaning the spray arm jetsBottom spray arm Remedying small malfunctions What to do ifFault code Å 30 is dis Dishes are still dirty If the Dishwashing Results are not SatisfactoryDishes do not dry and are not shining There are dried water drops on the glasses and dishesOld appliance DisposalPackaging material Technical data Full load Half load Example loading arrangementsPage Safety Information for the Installation Installation and connection instructionsInstalling the Dishwasher Free-standing appliances Connecting to the water supply Connecting the dishwasherConnecting the inlet hose Permitted water pressureDrain hose Water drainageExtension hoses Sink outlet connectionElectrical Connection Anti-flood systemChanging a fuse Green and Yellow Earth BlueNeutral BrownLiveConnecting systems Great Britain Warranty conditionsCustomer Care For general enquiries concerning 0870 5 929AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG
Related manuals
Manual 32 pages 54.5 Kb