AEG 40850 Prior to Using for the First Time, Setting the Water Softener, Setting manually

The control indicators have the following meanings:

1)	Refill with dishwasher salt
1)	Refill with rinse aid

1) These control indicators are never illuminated while a dishwashing cycle is running.

Prior to Using for the First Time

3 If you wish to use 3 in 1 detergent:

–First read the section “Using 3in1 detergents”.

–Do not fill up with special salt or rinse aid.

If you do not use 3in1 detergent, before using for the first time

1.Set the water softener

2.Fill up with dishwasher salt

3.Fill up with rinse aid

Setting the Water Softener

The water softener must be set manually and electronically:

3 To avoid scale deposits on the dishes and in the dishwasher, the dishes must be washed with soft water, i.e. water with a low lime content. The water softener must be set according to the table to the water hard- ness in the area where you live. Your local water company will be able to give you information about the water hardness in your area.

The dishwasher must be switched off.

Setting manually:

1. Open the dishwasher door.

2.Remove the lower basket from the dishwasher.

3.Turn water hardness dial on the left wall of the dishwasher interior to O or 1 (see table).

8