AEG 40850 manual Installing the Dishwasher

Page 36

Installing the Dishwasher

•The dishwasher must be installed on a firm floor and adjusted to en- sure that it is stable and level in all directions.

• To compensate for unevenness in the floor and to match the height of the appliance to that of sur- rounding units, extend the thread- ed feet using a screwdriver.

•The drain hose, inlet hose and mains cable must be laid so that they are able to move freely within the plinth area, and so that they are not kinked or crushed when the dishwasher is in position.

•The dishwasher must also be screwed tightly to the work surface

or to the adjoining units. This is essential to ensure the dishwasher does not tip up.

36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents
Favorit Following symbols are used in the text Dear CustomerContents Safety Prior to using for the first timeChild Safety Follow the Instructions for installation and connectionGeneral Safety Diagram of Appliance Control PanelFunction button Set the water softener Prior to Using for the First Time Setting the Water SoftenerSetting manually Setting electronically 10LOnly when using the dishwasher for the first time Adding dishwasher SaltFilling Up with Rinse Aid Setting the Amount of Rinse Aid Required Activating/Deactivating the Rinse Aid dispenser Daily use Loading cutlery and dishesLoading cutlery Pots, Pans, Large PlatesCups, Glasses, Coffee Service Adjusting the Height of the Upper Basket Type Raising/Lowering the Upper Bas- ketType Raising / Lowering the upper bas- ket Adding Detergent Using 3in1 detergents Concentrated detergentsDetergent tablets If you want to use 3in1 products If you do not want to use 3in1 products any moreIf you want to use 4in1 products Selecting the dishwashing cycle Cycle Table Suitable TypeSelecting a programme Interrupting or Cancelling a dishwashing cycle Cancelling the dishwashing cycleStarting a Dishwashing Cycle Setting the Delay Timer Switching Off the dishwasherTo change the time delay Cancelling the time delayCare and cleaning Cleaning the filtersRemoving the Dishes Cleaning the spray arm jets Upper basket spray armBottom spray arm What to do if Remedying small malfunctionsFault code Å 30 is dis If the Dishwashing Results are not Satisfactory Dishes are still dirtyDishes do not dry and are not shining There are dried water drops on the glasses and dishesDisposal Packaging materialOld appliance Technical data Example loading arrangements Full load Half loadPage Installation and connection instructions Safety Information for the InstallationInstalling the Dishwasher Free-standing appliances Connecting the dishwasher Connecting to the water supplyConnecting the inlet hose Permitted water pressureWater drainage Drain hoseExtension hoses Sink outlet connectionAnti-flood system Electrical ConnectionChanging a fuse Green and Yellow Earth BlueNeutral BrownLiveConnecting systems Warranty conditions Great Britain0870 5 929 Customer Care For general enquiries concerningAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG
Related manuals
Manual 32 pages 54.5 Kb