AEG 40730 manual Setting the Delay Timer, Switching off the dishwasher, Removing the dishes

Page 21

Setting the Delay Timer

Using the delay timer you can delay the start of a dishwashing cycle for 3, 6 or 9 hours.

1.Press the ON/OFF button.

2.Press the Delay Timer button repeatedly until the indicator next to the number of hours for which the start of the dishwashing cycle is to be delayed lights up, e. g. 6h, if the cycle is to start in 6 hours.

3.Select dishwashing cycle.

The LED indicator for the programme selected and the indicator next to the number of hours will light up.

The dishwashing cycle will start automatically following a countdown of the hours set.

To change the time delay:

As long as the cycle has not yet started, you can still change the setting by pressing the DELAY TIMER button.

Cancelling the delay timer:

Press the DELAY TIMER button repeatedly until none of the three time displays is lit. The selected dishwashing cycle will begin immediately.

To change a dishwashing cycle

As long as the cycle has not yet started, you can still change the dish- washing cycle. First abort the dishwashing cycle, then re-set the time delay, lastly select the new dishwashing cycle.

Switching off the dishwasher

Do not switch off the dishwasher until the indicator for the end of the dishwasher cycle is illuminated in the cycle progress display.

1.Press the ON/OFF button. All display indicators will go out.

2.Turn off the water tap.

1Carefully open the door. Hot steam may escape.

Hot dishes are sensitive to knocks. Therefore leave the dishes to cool for about 15 minutes before removing them. You also get a better drying result.

Removing the dishes

3 It is normal for the inner door and the dispensers to be damp.

Empty the lower basket first, then the upper basket. This way you avoid dripping water from the upper basket onto dishes in the lower basket.

21

Image 21
Contents Favorit Dear customer Following symbols are used in the textContents Prior to using for the first time SafetyChild safety General safetyControl panel Diagram of applianceFunction button Setting the water softener Prior to using for the first timeSetting manually Setting electronicallySetting Adding special salt Only when using the dishwasher for the first timeFilling up with rinse aid Setting the amount of rinse aid required Loading cutlery and dishes Daily usePots, Pans, Large Plates Loading cutleryCups, Glasses, Coffee Service Raising/lowering the upper basket Adjusting the height of the upper basketAdding detergent Concentrated detergents Using 3in1 detergentsDetergent tablets If you want to use 3in1 productsDishwashing Suitable Type Selecting the dishwashing cycle Cycle TableSelecting a programme Starting a dishwashing cycle Interrupting or aborting a dishwashing cycleAborting the dishwashing cycle Setting the Delay Timer Switching off the dishwasherRemoving the dishes Cleaning the filters Care and cleaningUpper basket spray arm Cleaning the spray arm jetsBottom spray arm Remedying small malfunctions What to do ifIndicator for the end Dishwashing cycle is Dishes are still dirty If the dishwashing results are not satisfactoryDishes do not dry and are not shining There are dried water drops on the glasses and dishesDisposal Packaging materialOld appliance Technical data Full load Half load Example loading arrangementsPage Safety information for the installation Installation and connection instructionsInstalling the dishwasher Free-standing appliances Connecting to the water supply Connecting the dishwasherConnecting the inlet hose Permitted water pressureDrain hose Water drainageExtension hoses Sink outlet connectionElectrical connection Anti-flood systemConnecting systems Autres agences étrangères assurant le service après-vente Further after-sales service agencies overseasWeitere Kundendienststellen im Ausland Otros puntos de Postventa en el extranjeroE. Abu Dhabi Jordan Malta Hungary Page Service AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG