AEG 40730 Prior to using for the first time, Setting the water softener, Salt, Setting manually

Page 7

The control indicators have the following meanings:

SALT 1)

Refill with special salt

RINSE AID 1)

Refill with rinse aid

 

 

1) These control indicators are never illuminated while a dishwashing cycle is running.

Prior to using for the first time

3 If you wish to use 3 in 1 detergent:

First read the section “Using 3in1 detergents”.

Do not fill up with special salt or rinse aid.

If you do not use 3in1 detergent, before using for the first time

1.Set the water softener

2.Fill up with special salt for water softeners

3.Fill up with rinse aid

Setting the water softener

The water softener must be set manually and electronically:

3 To avoid scale deposits on the dishes and in the dishwasher, the dishes must be washed with soft water, i.e. water with a low lime content. The water softener must be set according to the table to the water hard- ness in the area where you live. Your local water company will be able to give you information about the water hardness in your area.

The dishwasher must be switched off.

Setting manually:

1. Open the dishwasher door.

2.Remove the lower basket from the dishwasher.

3.Turn water hardness dial on the left wall of the dishwasher interior to O or 1 (see table).

Setting electronically:

1. Press the ON/OFF button.

7

Image 7
Contents Favorit Dear customer Following symbols are used in the textContents General safety SafetyPrior to using for the first time Child safetyControl panel Diagram of applianceFunction button Setting electronically Prior to using for the first timeSetting the water softener Setting manuallySetting Adding special salt Only when using the dishwasher for the first timeFilling up with rinse aid Setting the amount of rinse aid required Loading cutlery and dishes Daily usePots, Pans, Large Plates Loading cutleryCups, Glasses, Coffee Service Raising/lowering the upper basket Adjusting the height of the upper basketAdding detergent If you want to use 3in1 products Using 3in1 detergentsConcentrated detergents Detergent tabletsDishwashing Suitable Type Selecting the dishwashing cycle Cycle TableSelecting a programme Interrupting or aborting a dishwashing cycle Starting a dishwashing cycleAborting the dishwashing cycle Switching off the dishwasher Setting the Delay TimerRemoving the dishes Cleaning the filters Care and cleaningUpper basket spray arm Cleaning the spray arm jetsBottom spray arm Remedying small malfunctions What to do ifIndicator for the end Dishwashing cycle is There are dried water drops on the glasses and dishes If the dishwashing results are not satisfactoryDishes are still dirty Dishes do not dry and are not shiningPackaging material DisposalOld appliance Technical data Full load Half load Example loading arrangementsPage Safety information for the installation Installation and connection instructionsInstalling the dishwasher Free-standing appliances Permitted water pressure Connecting the dishwasherConnecting to the water supply Connecting the inlet hoseSink outlet connection Water drainageDrain hose Extension hosesElectrical connection Anti-flood systemConnecting systems Otros puntos de Postventa en el extranjero Further after-sales service agencies overseasAutres agences étrangères assurant le service après-vente Weitere Kundendienststellen im AuslandE. Abu Dhabi Jordan Malta Hungary Page Service AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG