AEG 84602 G, 85600 G, 856001 G manual Installation

Page 15

			CLEARANCES REQUIRED					CLEARANCES REQUIRED
		WHEN FITTING THE GAS HOB						CLEARANCES REQUIRED
		WHEN FITTING THE GAS HOB						WHEN FITTING THE GAS HOB
		WITHOUT A COOKER HOOD ABOVE						WHEN FITTING THE GAS HOB
		WITHOUT A COOKER HOOD ABOVE						WITH A COOKER HOOD ABOVE
								WITH A COOKER HOOD ABOVE
								600 mm
700 mm
						70650 mm
		420 mm
			mm				420 mm
			mm
		50	55					mm
			mm					mm
					420 mm		50	55
								55
								mm
										420 mm

100
100	mm					100
	mm						mm
			50
				mm
								50
									mm


FO 0812						FO 0813

Installation

IMPORTANT

This hob must be installed by qualified personnel to the relevant British Standards.

Any gas installation must be carried out by a registered CORGI installer.

The manufacturer will not accept liability, should the above instructions or any of the other safety instructions incorporated in this book be ignored.

15

Image 15

Contents 85600 G 856001 G Installation Child SafetyDuring Use Environmental Information ServiceContents Guide to Use the instructions Description of the Hob InstallationHOB Burners OperationBurners Maintenance and CleaningHob Top Pan SupportsSomething Not Working? Symptom Solution0870 5 929 Service and Spare PartsEuropean Guarantee Guarantee ConditionsEngineer technical data Instructions for the InstallerBurner Location Important safety requirementsInstallation Gas Connection Cut Out Size BuildingBuilding over a cupboard or drawer Building over a kitchen unit with door Fitting the hob to the worktop This HOB Must be Earthed Electrical connectionsPermanent Connection Wiring diagramPreliminary Electrical Systems Check Fault FindingEarth Continuity Check Check gas supply at burner Ignition System / Gas IgnitionCommissioning Pressure TestingMethod Conversion from Natural Gas to LPG