AEG 856001 G, 84602 G, 85600 G manual Cut Out Size, Building over a cupboard or drawer

Page 17

Cut Out Size

The dimensions of the cut-out are given in the diagram.

580		510
580
	550	470
	550
55	min
	min
	.
FO 2272

Building In

Building over a cupboard or drawer

If the hob is to be installed above a cupboard or drawer it will be necessary to fit a heat resistant board below the base of the hob on the underside of the work surface.

It is also recommended to carry out the electrical connection to the hob as shown in diagrams 1 and 2.

Image 17

Contents 85600 G 856001 G During Use InstallationChild Safety Environmental Information ServiceContents Guide to Use the instructions Description of the Hob InstallationHOB Burners OperationHob Top Maintenance and CleaningPan Supports BurnersSomething Not Working? Symptom Solution0870 5 929 Service and Spare PartsEuropean Guarantee Guarantee ConditionsEngineer technical data Instructions for the InstallerBurner Location Important safety requirementsInstallation Gas Connection Building over a cupboard or drawer Cut Out SizeBuilding Building over a kitchen unit with door Fitting the hob to the worktop This HOB Must be Earthed Electrical connectionsPermanent Connection Wiring diagramPreliminary Electrical Systems Check Fault FindingEarth Continuity Check Check gas supply at burner Ignition System / Gas IgnitionCommissioning Pressure TestingMethod Conversion from Natural Gas to LPG