Bosch Appliances SHE66C Bottom Rack Accessories, Loading Extra Tall Items

Figure 14

Figure 12

Preparing and Loading the Dishware (continued)

Bottom Rack Accessories

Flip Tines

Flip Tines fold down to make loading the racks easier in some

instances.

Grasp the tines as shown in Figure 12 and fold the tines downward.

Rack Attachment

(models SHE66C, SHX57C and SHV57C only)

The rack attachment has two additional cup shelves upon which to place cups and large kitchen utensils. The rack attachment is as- sembled on the rear edge of the lower rack.

To assemble:

Slide the Rack Attachment in Figure 14, keeping the longest tines on the inside of the top basket wire (a) and on the outside of the lower basket wire (b), see Figure 13. The

short tines will snap into place, see Figure 15.

	Figure 13
	Rear
a	corner
	view of
	Rack
b	inset

Rack Attachment Use

To use the rack attachment, fold down the cup shelves and place items to be washed, see Figure 15.

Loading Extra Tall Items

If an item is too tall to be placed into the bottom rack even with the top rack in the raised position,

Remove the empty top rack by pulling it out of the dishwasher until it stops rolling.

Pull the front of the rack upward and outward until the rollers are completely free of the roller guides. Set the top rack aside.

Push the

roller guidesFigure 16 back into the

dishwasher.

Insert the Extra Tall Item Sprinkler into the top rack spray outlet and turn the sprinkler clockwise to lock it into position as shown in Figure 16.

NOTE: Keep the vent on the tub’s right side clear by placing tall items such as plastic cutting boards and tall baking sheets on the bottom rack's left side, center, or back.

Figure 15

8