Final Checklist

Final Checklist

Check Electrical Requirements.

Be sure you have correct electrical supply and recommended grounding method.

Turn on the hot water shut-off valve and electrical supply. Water temperature should be 140°F (60°C).

Operate the dishwasher through one cycle and check for plumbing leaks.

If the dishwasher does not operate properly, refer to the SELF- HELP, CUSTOMER SERVICE and WARRANTY sections in the Use and Care Manual.

Customer Service Information

If service becomes necessary, contact your dealer or installer or an authorized service center. Do not attempt to repair the appliance yourself. Any work performed by unauthorized personnel may void the warranty. If problem persists, take the following steps (in the order listed below) until the problem is corrected to your satisfaction.

1.Contact your installer or the Bosch Authorized Service Contractor in your area.

2.E-mail us from the Customer Service section of our web site, www.boschappliances.com.

3.Write to us at the address below:

BSH Home Appliances, Corp.

5551 McFadden Avenue

Huntington Beach, CA 92649

4.Call us at: 1-800/944-2904.

Please be sure to include (if writing), or have available (if calling), the following information:

•Model Number

•Serial Number

•Date of Original Purchase

•Date Problem Originated

•Explanation of Problem

Also, if writing, please be sure to include a daytime phone number.

(You will find the model number and serial number information on the label located on the right-hand side of the inner door of the dishwasher).

LEAVEINSTALLATIONINSTRUCTIONSAND

USE & CARE MANUAL WITH OWNER.