Bosch Appliances SHU 3131 Choosing a Location, Choosing the Location, Cabinet Opening Dimensions

CHOOSING A LOCATION

THESE INSTALLATION

INSTRUCTIONS ARE

INTENDEDFORUSEBY

QUALIFIEDINSTALLERS

Choosing the Location

Select a location as close to the sink as possible for ready access to water and drain lines.

Most of the installation work is done before the dishwasher is moved into place.

Any built-in dishwasher must be fully enclosed on the top, both sides and back. Therefore the cabinet space below your counter is probably the best location.

3-1/2” (90mm)

1-15/16” (49mm) 4” (102mm)

Figure 4

NOTE: This dimension will vary by model due to control panel differences.

Overall Dishwasher Dimensions

	A	Height	33 7/8" (860 mm) min.
	B	Width
			23 9/16" (598 mm) min.
	C	Depth	22 7/16" (570 mm) min.
Table 1 – See Figure 4
Cabinet Opening Dimensions
	A	Height	34	" (864 mm) min.
	B	Width	23 5/8" (600 mm) min.
			4	(61 mm in.
	C	Depth	24	" (610 mm) min.

Table 2 – See Figure 5

For proper operation and appearance of the dishwasher, the cabinet opening should be square and have dimensions as shown in Figure 5.

If the dishwasher is to be installed in a corner, make sure there is adequate clea- rance to open the door. See Figure 6.

24” (610 mm)	C
90°	90°
A
34” (864mm) minimum
B
23-5/8" - 24-1/8" (600-613 mm)

Figure 5

Clearance
for door	Dishwasher
opening
Door in
open
position
	Countertop

Figure 6

www.boschappliances.com ENGLISH - 5