TOOLS & MATERIALS NEEDED
Tools Needed for Installation
| Hammer | Hole saw or 1” hole cutter |
Pipe wrench, 2 reqd. | Tape Measure | Slotted screwdriver (#2) |
Adjustable wrench, | Wire Cutter | Phillips screwdriver (#2) |
| ||
(size med., 2 reqd.) |
|
|
|
| Torx screwdriver, #20 |
Wire stripper | Electric Drill |
|
|
| |
|
| Level |
Figure 1
Materials Needed
1 2
3
4
Electric Connection - 2 conductor, 1 ground insulated electrical supply cable (30” or sufficient length for your installation).
Hot Water Supply Line - Minimum 3/8” O.D. copper tubing or metal braided dishwasher supply line.
90° elbow with 3/8” N.P.T. external threads on one end and sized to fit your water supply line on the other end.
5
6
7
Teflon tape or other pipe thread compound which help seal plumbing connections.
3
UL listed conduit connector or strain relief.
Additional materials may be required to comply with local codes.
Figure 2
www.boschappliances.com ENGLISH - 3