Russell Hobbs RHDW1 instruction manual Testing strip

Page 13

In order to understand whether or not the amount of softener salt in your machine is sufficient, check the transparent section on the salt compartment cap. There is sufficient salt if the transparent section is green. Salt has to be added if the transparent section is not green.

Testing strip

The washing effectiveness of your machine depends on the softness of the tap water. For this reason, your machine is equipped with a system that reduces the hardness in mains water supply. The washing effectiveness will increase when the system is correctly set. To find out the water hardness level of water in your area, contact your local water board or determine water hardness level by using the test strip(if available).

Open the	Run	Keep the	Shake the	Wait for	Make your machine’s water hardness
testing	water	testing	testing strip	1 min.	setting according to the result obtained
strip.	through	strip in	after taking it		through the testing strip.
	your tap	water for 1	out of water.
	for 1	sec.
	min.

Adjusting salt consumption

Table of Water Hardness Level Settings

If the hardness of the water you use is above 90 dF (French hardness) or if you are using well water; you are recommended to use filter and water refinement devices.

NOTE: Hardness level is adjusted to level 3 as a factory setting.

12

Image 13

Contents Dishwasher Contents Standard loading and Test data ………………………………………………………… Upper basket adjustable track latch Getting Familiar with Your Machine When you take delivery of your machine Safety Information and RecommendationsPoints to pay attention during machine installation Daily use For your children’s safetyCase of malfunctioning Items not suitable for dishwashing Installing the MachinePositioning the machine Water inlet hose Water connectionWater outlet hose Fitting the machine undercounter Electrical connectionPage Preparing the Machine for USE Prior to using the machine for the first timeImportance of water decalcification Testing strip Adjusting salt consumption Detergent usage Points to consider when using this type of productsFilling the detergent compartment Combined detergentsFilling with rinse aid and making the setting When you give up using combined detergentsDish rack Loading Your DishwasherLower Basket Folding Racks Top basket height adjustment while it is fullGoblet clamp Page Detergent / Rinse aid Standard loading and test data CapacityProgramme test Programme items Programme DescriptionsSwitching on the machine Switching on the Machine and Selecting a ProgrammeProgram follow-up Changing a programmeSwitching the machine off Changing a programme with resettingCleaning machine Maintenance and CleaningFilters Hose filter Spray armsIf the Wash/Dry and End lights keep flashing Failure Codes and What to do in Case of FailureIf the control light won’t go out after a wash operation If there are partial food wastes left on the dishes If the machine stops during a wash operationIf there are whitish stains on the dishes If the dishes wont dry upPractical and Useful Information 0845 683 8717 Opening times