Russell Hobbs RHDW1 Switching on the Machine and Selecting a Programme, Switching on the machine

Page 22

SWITCHING ON THE MACHINE AND SELECTING A PROGRAMME

Switching on the machine

1. Press the Power On/Off button.

2. Select the program suiting your dishes via the Program Selection

button.

Once the Power On/Off key is pressed, the lamp Power Start/Pause is highlighted.

The lamp on Program Start/Pause button goes off once the Program starts and the washing/Drying lamp is highlighted.

3.Start the program pressing the Power Start/Pause button.

Program follow-up

You can follow the program flow using the program follow-up lambs located on the control panel.

	Do not open the cover before
	the lamp Finished is on.
As long as Washing and Drying goes
on the Washing/Drying lamp is lit.
When drying is active the machine	Once the program is over, the
stays silent about 40-50 minutes	End light is illuminated.

Changing a programme

If you would like to change programs while a washing program is continuing.

The new program started will resume the course of the old program.

After the program stops, select your desired program via the

Press the PowerProgram selection button. Start/Pause key.

Start the program you have newly selected by pressing again the Start/Pause key.

21

Image 22

Contents Dishwasher Contents Standard loading and Test data ………………………………………………………… Upper basket adjustable track latch Getting Familiar with Your Machine When you take delivery of your machine Safety Information and RecommendationsPoints to pay attention during machine installation Daily use For your children’s safetyCase of malfunctioning Items not suitable for dishwashing Installing the MachinePositioning the machine Water inlet hose Water connectionWater outlet hose Electrical connection Fitting the machine undercounterPage Preparing the Machine for USE Prior to using the machine for the first timeImportance of water decalcification Testing strip Adjusting salt consumption Filling the detergent compartment Points to consider when using this type of productsDetergent usage Combined detergentsWhen you give up using combined detergents Filling with rinse aid and making the settingLoading Your Dishwasher Dish rackLower Basket Folding Racks Top basket height adjustment while it is fullGoblet clamp Page Detergent / Rinse aid Standard loading and test data CapacityProgramme test Programme Descriptions Programme itemsProgram follow-up Switching on the Machine and Selecting a ProgrammeSwitching on the machine Changing a programmeChanging a programme with resetting Switching the machine offCleaning machine Maintenance and CleaningFilters Spray arms Hose filterIf the Wash/Dry and End lights keep flashing Failure Codes and What to do in Case of FailureIf the control light won’t go out after a wash operation If there are whitish stains on the dishes If the machine stops during a wash operationIf there are partial food wastes left on the dishes If the dishes wont dry upPractical and Useful Information 0845 683 8717 Opening times