The rinse aid level adjuster can be set to a position between 1 and 6. Factory setting for rinse aid is the position 3.
You need to increase the degree of the adjuster if water stains form on your dishes after a wash, whereas you need to decrease the degree if a blue stain is left when wiped by hand.
Warning: Use only those rinse aid materials which are allowed for use in the machine. As rinse aid residues left as a result of overflowing will create extremely high amounts of foam and thus reduce the washing performance, remove the excess amount of rinse aid by wiping it with a rag.
LOADING YOUR DISHWASHER
If you properly place your dishes into the machine, you will be using it in the best way in terms of energy consumption, washing and drying performance.
There are two separate baskets for you to load your dishes into your machine. You can load
round and deep items as pots with long handles, pot lids, plates, salad,plates, cutlery sets In to the lower basket.
The upper basket has been designed for tea plates, dessert plates, salad bowls, cups and glasses. When placing
It is more appropriate to locate the thin narrow parts into the middle sections of baskets. You can place spoons among the other cutlery sets in order to prevent them from sticking to one another. You are recommended to use the cutlery grid in order to obtain the best result. To avoid any possible injuries, always place such
Warning: Place your dishes into your machine in a way that they will not prevent the upper and lower spray arms from spinning.
Dish rack
There are dish racks on the upper basket of your
machine. 
You can use these dish racks in open or closed position. When they are in open position 
you can place your cups on them; and when in closed position 
you can place long glasses on the basket. Also, you can use these racks by placing long forks, knives and spoons on them laterally.
16