HOW TO USE ① Toasting with One-Touch Toast Buttons
One-Touch Toast
Set the Shade Control Dial to the desired toast color and press Number of Slice button. The microcomputer automatically controls cooking time and power based on the slice and shade selected.
During the first use, the unit may emit odor or smoke. The odor or smoke will lessen as the unit is used. This is not a malfunction.
Plug in power supply | 2 Place bread slice(s) on the Oven Rack. | |||
1 plug into the outlet. | ||||
A beep will sound. | How to Place Bread Slice(s) Evenly | |||
| 1 Slice | 2 Slices | 3 Slices | 4 Slices |
•Place bread slices as illustrated above for even heat distribution.
•When toasting three bread slices, they may be browned more than desired. Adjust the Shade Control Dial to the desired toast color.
•The standard size of the bread slice for toasting four slices is 4 1/2" x 4 1/4". If the slices are larger than this, toast one or two slices at a time.
3 Set the Shade Control Dial.
•The Shade Control Dial can be set two levels lighter or darker than the standard position.
•During the first use, set to the standard position.
Note: The shade may vary depending on type, size and thickness of bread or room temperature.
Standard
Setting
4 Press One -Touch Toast Button.
•Press
•Do not open door during the operation. Doing so will change the doneness.
•The unit may emit steam when moisture from foods evaporate.
•Refer page 9 for changing settings or stopping operation.
1 Slice Standard Toasting Time
| (when bread slices are placed | |
| as recommended) | |
2 Slices | 1 Slice | Approx. 1 min. 58 sec. |
| 2 Slices | Approx. 2 min. 30 sec. |
|
|
|
3•4 Slices | Approx. 3 min. 15 sec. | |
|
| |
5 Remove bread slice(s).
When toasting is done, the unit beeps three times and heaters are turned off automatically.
•Care must be taken to avoid burns when you remove bread from oven. Be extra careful when you remove bread from the back side of oven. Do not touch door or inside of oven as they remain very hot.
•Unplug the Power Supply Cord from the outlet after use.
•Do not move the unit until it has completely cooled.
8