Lincoln Series 1100 manual Impinger II and Advantage Stacking Instructions CONT’D, For Triple Oven

Page 14

IMPINGER II AND ADVANTAGE STACKING INSTRUCTIONS (CONT’D)

FOR TRIPLE OVEN

(STEP 1)

(STEP 2)

1.Remove door, conveyor and finger assemblies.

2.Turn unit on side, as shown.

3.Fasten base to oven with four ½ - 13 x ½” long Hex Head Bolts.

4.Screw casters into base.

(STEP 3)

1.Prepare top for mounting as shown above.

(STEP 4)

OVEN TO BE STACKED

1.Remove door, conveyor and finger assemblies.

2.Turn unit on left side, as shown.

3.Assemble top of bottom unit to bottom of top unit with 4 bolts, as shown.

1.Set oven upright.

2.Remove oven top by removeing 2 screws in front and 2 screws in back.

(Save the screws.)

3.Replace door, conveyor and fingers.

(STEP 5)

1.Position top oven over bottom and align the top oven flanges over the outside of the bottom oven, as shown.

2.Lower oven in place.

3.Fasten ovens together using the four screws from Step 2 (2-front, 2-back).

4.Replace door, conveyor and fingers.

5.Repeat steps 2 –5 to stack third oven.

14	Impinger II – Digital Advantage Ops Manual –Dom & Int’l

Image 14

Contents Installation & Operating Instructions Warranty Table of Contents PURCHASER’S ResponsibilityUtility Specifications Required Electric Utility Specifications Required GASModel Number KEY Country Language Code Not UsedVentilation Guidelines SpacingVentilation Smoke Candle Test Ventilation System Verification Test ProcedureLincoln Impinger 1100 Series Triple DECK, Double Deck Oven SET-UP for this TestExterior Dimensions Impinger II Oven Models Exterior Dimensions Advantage Oven Models GAS Installation Utility Service LayoutInstallation Codes and Guidelines Electrical Installation OperationsGeneral Information Packing and WeightsAssembly Instruction If There is Apparent DamageImpinger II and Advantage Stacking Instructions For Single OvenImpinger II and Advantage Stacking Instructions CONT’D For Triple OvenConveyor Removal Conveyor Disassembly for Cleaning Finger Assembly RemovalBottom Finger Assmbly Finger Assembly Removal CONT’DHOW to Obtain Service TOP Finger AssmblyImpinger II Digital Advantage Ops Manual -Dom & Int’l START-UP ImpingerAdvantage Shut DownProgramming the Digital Advantage 1100 Series Touch PAD Diagnostic MessagesReversing Switch FunctionsDaily Operator MaintenanceCleaning Instructions WeeklyAppendix a Label Definitions USE of Oven Preventive MaintenanceConcepts