Using PCs
Analog modems connected to the FCT telephone line work in the same way as if they were connected to the fixed line. In this way, you can use your PC standard modem to make data calls (Internet browsing,
To be able to send and receive data calls, you need:
–a PC equipped with an analog modem and the appropriate computer program (Web Browser,
–a SIM card that supports data transmission over the GSM network.
Note: if you do not have a modem in your PC, the FCT can be configured to act as a modem itself. This requires the installation of the FCT modem drivers on your PC. For this specific configuration, please refer to the FCT Data Reference Manual in “Accessories” on page 39.
The FCT should be
You can choose between two connection methods:
•GPRS data: GPRS allows you to be always online as you are not charged for the connection time but for the amount of information that you exchange.
You need a SIM card that supports GPRS. Please contact your network operator for charging subscription details.
•GSM data: normally, you pay for all the time you are connected. You need a SIM card that supports GSM data.
For fast and efficient access, try the GPRS access type.
GPRS data access type
GPRS data access type allows you to make outgoing calls only, usually to connect to the Internet.
Your GSM network operator provides you with an Internet connection as part of the GPRS service.
Warning!: the GPRS data communication service has to be registered with your network operator. Otherwise, the network will not accept GPRS calls.
If your SIM card supports GPRS, your network operator must supply you with a user name and password in order to access the GPRS network, and
Using PCs | 19 |