Ericsson F221m Connecting fixed line devices, Tip if your house or company is already wired with

Warning!: once you have fixed the FCT to the wall and switched it on, check the final status of the red and green lights. If either one is off, there is a problem with the power supply or the GSM signal. See “Troubleshooting and FCT indicators” on page 33.

Now the FCT is ready for connecting devices and making calls.

Note: if you want to remove the FCT from the wall bracket, then you have to press the flap (step 1) as indicated in the following picture and then shift the FCT upwards (step 2).

Connecting fixed line devices

Connect the fixed line devices to the FCT (telephone line connector) with telephone wire in the same way as with an analog telephone line.

Fixed line devices are connected in parallel. You can connect the devices directly to the FCT telephone line connector (RJ11) or make an internal telephone wiring, use RJ11 splitters or similar connectors.

GSM Network

Pc

Telephone line

Telephone Display Fax Pc

Note: when making the connections, the two-wire telephone cable polarity does not affect at all.

Tip: if your house or company is already wired with

telephone cable, you only need to connect the cable to the FCT RJ11 connector and your telephone line will be up and running in all rooms.

14 Connections