Note: if instead of hearing beeps you hear a deep tone, this means that there has been an error in the activation or deactivation.
More than one call (call wait, call hold, call transfer, multiparty call)
You can handle more than one call simultaneously. For example, you can put an ongoing call on hold, while you make or answer a second call, and then switch between the two calls.
You can also set up a conference call to have a joint conversation with up to four people.
Call waiting service
If you wish to be able to receive a second call while another call is in progress, you must turn on the call waiting service.
Note: if you are engaged in a fax or a data call, any other incoming calls are rejected.
Warning!: these dialing sequences may vary depending on your network operator. If these do not work, please consult your network operator or check the user guide provided with your subscription.
To manage |
|
| |
Call waiting | Dial… | You will hear… | |
Function… |
|
| |
Activate | *43# | 1 beep | |
|
|
| |
Deactivate | #43# | 3 beeps | |
|
|
| |
Check status | *#43# | 1 beep if activated | |
3 beeps if deactivated | |||
|
|
Note: if instead of hearing beeps you hear a deep tone, this means that there has been an error in the activation or deactivation.
Making a second call
You can only put one call on hold while you make a second call.
•To hold the active call: press the R key on your telephone and proceed to make the second call.
•To switch between the two calls, press R2.
•To finish the active call and return to the held call, press R1.
Receiving a second call
If the call waiting service is on, you hear a tone in the telephone when you receive a second call.
26 Advanced features